Professional Documents
Culture Documents
Temp Controlled
Temp Controlled
Internship
Presentation on
Presented By:
Shradha
1
Internship Site
Company Profile
3
Clients And Partnerships
4
Operation Of Company
embedded
VLSI Mechatronics
system
NS2
Power electronics Data mining
5
Summary
Generally, electronic devices produce more heat. So this heat should be reduced in
order to protect the device. There are many ways to reduce this heat. One way is to
This article describes two such circuits that automatically, switches the fan when it
detects the temperature inside the device greater than its threshold value.
Technical Paper
A remote monitoring, control and intelligent are one of the most important criteria for
maximizing process plant availability production. With the development of modern industry
the requirement for industrial monitoring system is getting higher. A system is required to be
able to acquire and process real time data. It is also required to control related instruments to
change those environmental factors and monitoring in long distance so that it realizes modern,
intelligent and accurate control. The main aim of the project is to develop an embedded web
system using ARM11 processor and real time operating system, which enables data
acquisition and status monitoring with the help of any standard web browser. The web pages
which are required for the web server were developed using HTML. This embedded web
Components
1. Arduino UNO
2. DHT11 sensor
3. DC Fan
4. 2n2222 transistor
5. 9 volt battery
6. 16x2 LCD
7. 1K resistor
8. Connecting wires
8
DHT11 Sensor
Specifications:-
Power Supply : 3.3~5.5V DC
9
Design Methodology
10
Design Methodology
This project consists of three sections. One senses the temperature by using humidity
and temperature sensor namely DHT11. The second section reads the dht11 sensor
module’s output and extracts temperature value into a suitable number in Celsius scale
and control the fan speed by using PWM. And last part of system shows humidity and
temperature on LCD and Fan driver.
Here in this project, we have used a sensor module namely DHT11 that already has
discuss our previous project namely “
Humidity and Temperature Measurement using Arduino”. Here we have only used
this DHT sensor for sensing temperature, and then programmed our arduino according to
the requirements.
11
Result
12
References
3. G.J. Fiedler, J. Landy, “Multi-loop Automatic Temperature Control System Design for
Fluid Dynamics Facility Having Several Long Transport Delays,” IEEE IRE
Transactions on Automatic Control, pp. 81-96, 1959.
Thank You