Professional Documents
Culture Documents
Plate 2 - STAAD
Plate 2 - STAAD
3
Analysis Of Frames (DL+LL) Using
Conventional method
1. Select Critical Area/Tributary Area
2. Provide Blow-up plan for the selected critical
area
Complete the details of the blow-up plan, include
walls, columns and other structural and non
structural members.
Include loading distribution in beams for one way
and two way slab for every floor
3.Prepare your NSCP 2015
We will now find the values of the different parameters use in the
design of Reinforced Concrete.
a. Design Parameters for Live Loads
--- Table 205-1 Minimum Uniform and Concentrated Live Loads
b. Design Parameters for Dead Loads
--- Table 204-1 Minimum Densities for Design Loads from materials (
KN/m3)
----Table 204-2 Minimum Design Dead Loads (Kpa)
c. Basic Load Combination
----Table 405.3.1
4.Provide Preliminary Dimensions
a. Beams
Roofbeam
2nd floor Beam
Tie beam
b. Columns
C. Footing
5.Computation of DL & LL
Compute unfactored W(DL) dead loads and
W(LL) live loads for every floor.
Provide blow-up plan, include walls, columns and
floor slab considered in the analysis.
6.Moment Distribution Method for frames
DL LL
Roofdeck
2nd Flr