The document describes a new method involving making a bulk batch of ND10/water solution, adding titration checks to verify the concentration, buying an additional boiler to preheat the solution, and insulating the barrel and lid to optimize heat retention and minimize loss. These changes will be completed by January 22, 2016 to improve the current process of using hot water, ND10/water solution, and insulation.
The document describes a new method involving making a bulk batch of ND10/water solution, adding titration checks to verify the concentration, buying an additional boiler to preheat the solution, and insulating the barrel and lid to optimize heat retention and minimize loss. These changes will be completed by January 22, 2016 to improve the current process of using hot water, ND10/water solution, and insulation.
The document describes a new method involving making a bulk batch of ND10/water solution, adding titration checks to verify the concentration, buying an additional boiler to preheat the solution, and insulating the barrel and lid to optimize heat retention and minimize loss. These changes will be completed by January 22, 2016 to improve the current process of using hot water, ND10/water solution, and insulation.
parts and rinse 2 Hot ND10/Water 3 Insulate jacket and lid
900 litre IBC
1 2 with verified ND10/water New Method • 1 –Make 900 litres bulk batch of ND10/water at 25%/75% • 2- Add titration checks to control plan to verify ND10 ratio is correct for each batch • 3 -Buy and install additional water boiler to preheat ND10/water mix and supply 22.5 litres to barrel • 4 – Insulate barrel and lid to optimise heat retention in current process and verify the effect with a further temperature survey on heat loss • All the above action points will be completed by 22/01/16