Professional Documents
Culture Documents
17-Gas Turbine - Maintenance
17-Gas Turbine - Maintenance
BY
MUHAMMAD RIAZ SIDDIQUI
Objective
The objective of this presentation is to
introduce you about the basics of gas
turbine combustion inspection
COMBUSTION COMPONENTS
COMBUSTION LINERS
FUEL NOZZLES
TRANSITION PIECES
CROSSFIRE TUBES
Combustion Liners Ass’y
Common defects in combustion
liners
What to look for
Deposits
Wear
Cracks
Hot spots
Deformation
Breakage
Missing metal
Liner Defects
Wear
Crack
Combustion Liner Repair
Replacement of
Crossfire tube collar
Spring seal or leaves
Cowl cap
Weld repair of
cracks(GTAW)
Fuel nozzle
Fuel nozzle basically contains four
connections.
Liquid fuel line.
Gas fuel line.
Atomizing air line.
Purge air line.
Fuel Nozzle Inspection
What to look for
Deposits
Plugged orifices
Erosion
Corrosion
Wear
Fuel Nozzle – cleaning & checking
Nozzle is cleaned and following are
checked:
Gas fuel flow
Liquid fuel flow & spray pattern
Atomizing air flow
Crossfire Tube
What to look for
Distortion
Cracks
Burning
Missing Metal
Wear
Crossfire Tube Wear
Wear
Wear
Transition Piece
Common defects
Cracks due to thermal stresses.
Transition piece deformed.
Hot spots.
Deposits.
Missing metal.
Remedies
Cracks are repaired by welding.
If the transition pieces are out of
round,or deformed they are rejected.
Conclusion
QUESTION & ANSWERS