Professional Documents
Culture Documents
Dom 3 3.1
Dom 3 3.1
MACHINES
B.Tech Mechanical
5th – Semester
Praise Tom
Asst Prof.
Christ University
Faculty of Engineering
08/09/2023
CONTENT
UNIT – 1
Static Force Analysis.
UNIT-2
Dynamic Force Analysis.
Turning moment Diagram and Flywheel
UNIT-3
Friction and Belt drives.
Balancing of Rotating Masses.
UNIT-4
Balancing of Reciprocating Masses.
Governors.
UNIT-5
Gyroscope
Analysis of Cams
08/09/2023
Friction and Belt drives
08/09/2023
Problem 4
A shaft rotating at 200 r.p.m. drives another shaft at 300
Take μ = 0.3.
08/09/2023
1. Stress in the belt for an open belt drive
08/09/2023
2. Stress in the belt for a cross belt drive
08/09/2023
Centrifugal Tension
Centrifugal Force
08/09/2023
Maximum Tension in the Belt
08/09/2023
Condition For the Transmission of
Maximum Power
08/09/2023
08/09/2023
Problem 5
A leather belt is required to transmit 7.5 kW from a pulley
08/09/2023
Aim – To find out Width of the Belt. {Centrifugal Tension}
08/09/2023
08/09/2023
08/09/2023
Problem 6
Determine the width of a 9.75 mm thick leather belt required
the greatest power which the belt can transmit and the
08/09/2023
Speed of the belt for greatest power
08/09/2023
08/09/2023