Professional Documents
Culture Documents
KX-NS1000 Step by Step Guide PBX To PBX One-Look Network Stacking Card
KX-NS1000 Step by Step Guide PBX To PBX One-Look Network Stacking Card
KX-NS1000 Step by Step Guide PBX To PBX One-Look Network Stacking Card
CO Master
Fukuoka
IP
Register Network
IP Network
CO (VPN)
Tokyo
Register
Digital PT IP-PT
CO
Niseko Slave
Digital PT is connected with
TDE620 is connected Max. 15 slave NS1000 can be PBX by cable.
with TDE600 by cable. registered to one master IP-PT is registered to PBX.
NS1000.
2
2. Indicator
The PBX mode (Master or Slave) is indicated by LED.
Indicators
Software version
BATT
and suffix such as “BX” have to be same for
ALARM MASTER
both main unit and slave unit.
3
3. Stacking Card with one-look networking
You can connect a maximum of 2 existing PBXs for one KX-NS1000.
A maximum of 8 existing PBXs and 16 KX-NS1000 can be connected
for the entire One-look Network. They support 1,000 extensions.
An existing PBX refers to a Panasonic KX-TDE series, KX-NCP
series, or KX-TDA100/200/600/620 PBX.
IP Network
KX-TDE620
Stacking Stacking
KX-TDE600 KX-TDE620
KX-TDE600 KX-NCP Max. 8
Stacking Stacking KX-NCP PBXs
IP Network Stacking
Chapter Explanation
1 Activation key installation to Master PBX
2 Slave unit data assignment to Master PBX
3 Set-up Slave PBX
Activation key installation to Slave PBX
4 Slave PBX registration to Master PBX
5 Demo after set-up
5
Master
Unit
Chapter 1
Activation key installation
to Master PBX
Master
Register
Slave
6
Master
11. Trial Activation Key Unit
7
Master
12. Standard Activation Key Unit
8
Master
Unit
Chapter 2
Slave PBX data assignment
to Master PBX
Master
Register
Slave
9
Master
21. Add Site Wizard Unit
10
Master
22. Add Site Wizard Unit
11
Master
23. Add Site Wizard Unit
12
Master
24. Add Site Wizard Unit
13
Master
25. Add Site Wizard Unit
1. Select “No”.
“No” is strongly recommended for demo of one-look network.
If LAN is removed from slave PBX for example, back-up mode starts.
Even if LAN is connected again, back-up mode is kept until operation to
return to normal one-look mode. So demo of one-look network is not
possible without this operation.
14
Master
26. Change PBX Site Name Unit
15
Master
27. Change PBX Site Name Unit
16
Slave
Unit
Chapter 3
Setup Slave PBX
Activation key to Slave PBX
Master
Register
Slave
17
Slave
31. Easy Setup Wizard Unit
2. Click “Next”.
* If the slave is located on the same network with the Master, it is unnecessary to specify
the IP address of the Master.
18
Slave
32. Easy Setup Wizard Unit
3. Click “Next”.
2. Click “Next”.
19
Slave
33. Easy Setup Wizard Unit
20
Master
Unit
Chapter 4
Slave PBX registration
to Master PBX
Master
Register
Slave
21
Master
41. Register Slave unit Unit
1. Click [Registration].
22
Master
42. Register Slave unit Unit
23
Master
43. Register Slave unit Unit
24
Master
44. Register Slave unit Unit
25
Chapter 5
Demo after setup
26
51. Demo or test after setup
Paging to all extensions in Tokyo and Fukuoka.
N D
S H
0 L
1 C
KX-NT 3 8
Paging Paging 2
Paging
Paging
KX-DT
*33 – Paging group number (01)
27
52. Slave Unit - Programming
Slave unit can be programmed from master unit.
Slave unit
can be
selected.
Master Slave
28
53. Stacking Card - Programming
Property of cards in TDA/TDE/NCP can be programmed using
NS1000 Web.
29
54. Site ID
30
55. Direct Log-in to branch unit
Direct log-in is used to setup Built-in VM in slave unit.
- After direct log-in, Web-MC logs-out from master PBX
automatically.
Built-in VM :
500
Master
Built-in VM :
501
Slave
Built-in VM : 500
Master
Built-in VM :
501
Slave
31
Thank you !
32
Revision
33