Professional Documents
Culture Documents
RFID
RFID
OBJECTIVES
02
Components used
03
5
1 Provides green and
sustainable solution.
1
COMPONENTS USED:-
ARDUINO RECHARGABLE
BATTERY
LCD RELAY
RFID
SOLAR
PANEL
ARDUINO:
SOLAR PANEL:
Solar panel is an indispensable component of this system. It is
responsible to collect solar radiations and transform it into
electrical energy. Solar panel is an array of several solar cells .
The arrays can be formed by connecting them in parallel or series
connections depending on the energy required.
Relay:
A relay is an electrical operated switch current flowing through
the coil of the relay creates a magnetic field which attracts a lever
and changes the switch contacts. The coil current can be On or
Off so relay have two switch positions .
WORKING:
BLOCK DIAGRAM
The supply to the system is given by solar
energy. When user swipe RFID card in the
RFID reader, the communication between
RFID tag and RFID reader takes place and
sends result and signal to microcontroller
and relay gets close to start charging the
mobile phone. User has to plug the phone
to one of the pin. If RFID card is invalid
then RFID reader will not read the tag.
After completion of charging ,user can take
.
out his mobile
.
phone . All this process is
carried out by programmed microcontroller.
ALGORITHM:
1.START
2.SWAP RFID-CARD
This type of project is used in railway station for public when they are in need.
This project can be installed in rural areas where the power grid is not
available at partial/full time.
Charging slots can be increased for number of users. Laptop and camera can
be charged using this system . Also used theft proof RFID based charging
system.
THANK YOU