Professional Documents
Culture Documents
Tugas B.inggris Langkah Membuat Kabel LAN
Tugas B.inggris Langkah Membuat Kabel LAN
© Templateswise.com
How to make straight cables :
1. Connect between computer and switch
2. Connect the computer to the LAN via
DSL modem/cable
3. Connect the router to the LAN on the
DSL modem/cable
4. Connect the switch to the router
5. Connect the hub to the router
Steps to make straight cables:
1. Peel the end of the UTP cable, approximately 2 cm.
2. Untwist the cable, then straighten it and sort the colors
according to the standard.
3. After the sequence is according to standard, cut and
flatten the ends of the cable with crimping pliers
4. Insert the straight and parallel cable into the RJ-45
connector, and make sure all placements are correct.
5. Crimp and press until all the pins (brass) on the RJ-45
connector have bitten into each cable.
Steps to make a crossover cable:
© Templateswise.com