The document compares hardwire and serial connections for valve status and commands. Hardwire connections require 4 wires for status and 3 wires for commands, for a total of 7 wires per valve. Serial connections can transmit both status and commands over 2-4 wires using Modbus protocol. While serial connections require fewer wires, hardwire connections have no transmission delay and simpler installation due to direct connections.
The document compares hardwire and serial connections for valve status and commands. Hardwire connections require 4 wires for status and 3 wires for commands, for a total of 7 wires per valve. Serial connections can transmit both status and commands over 2-4 wires using Modbus protocol. While serial connections require fewer wires, hardwire connections have no transmission delay and simpler installation due to direct connections.
The document compares hardwire and serial connections for valve status and commands. Hardwire connections require 4 wires for status and 3 wires for commands, for a total of 7 wires per valve. Serial connections can transmit both status and commands over 2-4 wires using Modbus protocol. While serial connections require fewer wires, hardwire connections have no transmission delay and simpler installation due to direct connections.
CONNECTION PROJECT ROKAN - DUMAI Hardwire vs Serial connection Cable requirement for hardwire
• FOR STATUS VALVE (OPEN & CLOSE POSITION)
• NEED 4 WIRE CONNECTION DIRECTLY TO FLOWCOMPUTER OR • OTHER DEVICE. • (2 FOR OPEN STATUS & 2 FOR CLOSE STATUS)
• FOR COMMAND VALVE (OPEN & CLOSE COMMAND)
• NEED 3 WIRE CONNECTION DIRECTLY TO FLOWCOMPUTER OR • OTHER DEVICE. • (1 FOR OPEN STATUS, 1 FOR CLOSE STATUS, and 1 COMMON)
• TOTAL CABLE FOR EACH MOV = 7 WIRE
Hardwire vs Serial connection Cable requirement for Serial
• FOR STATUS VALVE (OPEN & CLOSE POSITION) &
• FOR COMMAND VALVE (OPEN & CLOSE COMMAND) • Using 2 or 4 (max) wire connection for Status & Command (using Modbus • Protocol)
• TOTAL CABLE FOR EACH MOV = 4 WIRE
Hardwire vs Serial connection Cable requirement For Cable requirement, Serial connection is better Hardwire Connection Serial Connection Cable MOV COMMAND - CLOSE
Cable FOR MOV COMMAND - OPEN
Cable for Status, Cable MOV STATUS - CLOSE Command, diagnostic
Cable MOV STATUS - OPEN
1 pair cable for all parameter (status, command, diagnostic) 4 pair cable for status and command Hardwire vs Serial connection Response time (especially for critical task) For Respond time, Hardwire is Superior Hardwire Connection Serial Connection
Delay due to transmit serial data
No Delay – Direct/dedicated cable Hardwire vs Serial connection Installation / Setup complexity For Installation/Setup, Hardwire is simple Hardwire Connection Serial Connection
Installation and setup simple due to direct/dedicated cabel
Installation and setup is more complex/difficult No need to setup (continuity only)
The Fast Track to Your General Class Ham Radio License: Comprehensive Preparation for All FCC General Class Exam Questions July 1, 2023 through June 30, 2027