This document contains two sample calculations to determine whether a bearing-bore fit is an interference or clearance fit. The first calculation shows a bearing diameter of 150mm with an upper limit of 150.000mm and lower limit of 149.975mm fitting into a bore with an upper limit of 149.915mm and lower limit of 149.875mm. The lower value of -0.125mm falls in the negative range, indicating an interference fit. The second calculation shows a bearing diameter of 120mm with an upper limit of 120.000mm and lower limit of 119.978mm fitting into a bore with an upper limit of 120.035mm and lower limit of 120.000mm. The lower value of 0.000
This document contains two sample calculations to determine whether a bearing-bore fit is an interference or clearance fit. The first calculation shows a bearing diameter of 150mm with an upper limit of 150.000mm and lower limit of 149.975mm fitting into a bore with an upper limit of 149.915mm and lower limit of 149.875mm. The lower value of -0.125mm falls in the negative range, indicating an interference fit. The second calculation shows a bearing diameter of 120mm with an upper limit of 120.000mm and lower limit of 119.978mm fitting into a bore with an upper limit of 120.035mm and lower limit of 120.000mm. The lower value of 0.000
This document contains two sample calculations to determine whether a bearing-bore fit is an interference or clearance fit. The first calculation shows a bearing diameter of 150mm with an upper limit of 150.000mm and lower limit of 149.975mm fitting into a bore with an upper limit of 149.915mm and lower limit of 149.875mm. The lower value of -0.125mm falls in the negative range, indicating an interference fit. The second calculation shows a bearing diameter of 120mm with an upper limit of 120.000mm and lower limit of 119.978mm fitting into a bore with an upper limit of 120.035mm and lower limit of 120.000mm. The lower value of 0.000
Upper Limit Tolerance: 150 -0.000 = 150.000 mm Lower Limit Tolerance : 150 -0.025 = 149.975 mm
Diameter of Bore: 150 S7(-0.085/-0.125) mm
Upper Limit Tolerance : 150 -0.085 = 149.915 mm Lower Limit Tolerance : 150 -0.125 = 149.875 mm Lower Value = 149.875 – 150.000 = - 0.125mm Results fall in negative range, So Higher Value it is an INTERFERENCE FIT = 149.915 – 149.975 = - 0.060mm Sample Calculation 2 Diameter of Bearing: 120 h6 (0.000 / -0.022) mm Upper Limit Tolerance: 120 -0.000 = 120.000 mm Lower Limit Tolerance : 120 -0.022 = 119.978 mm
Diameter of Bore: 120 H7(+0.035 / +0.000)
mm Upper Limit Tolerance : 120 +0.035 = 120.035 mm Lower Limit Tolerance : 120 +0.000 = 120.000 mm Lower Value = 120.000 – 120.000 = 0.000mm Results fall in positive range, So Higher Value it is a CLEARANCE FIT = 120.035 – 119.978 = + 0.057mm