Professional Documents
Culture Documents
Design and Optimization of Can Type Combustor
Design and Optimization of Can Type Combustor
Design and Optimization of Can Type Combustor
Supervisor Co-Supervisor
Sir Shakir Hussain Mr. Arif Nawaz
Introduction
Each "can" has its own fuel injector, igniter, liner, and casing.
Aside from aircraft applications they are used in industrial applications and in the
targeted drones.
Literature Review
Can-Type Combustor Design by Charles E. Hornbeck.
Inlet pressure ,Temperature ,Pressure Losses ,Mass Flow Rate , Fuel to Air Ratio and
different stage parameters.
MATLAB Code
Demonstration
Optimization
Timeline
7th Semester
Time Duration 1st - 4th Week 5th -16th Week
Work Distribution Literature Review Analytical Design
(MATLAB Code, Finalization of
Design Parameters)
8th Semester
Time Duration 1st – 8th Week 9th – 16th Week
Work Distribution Illustration(CFD / Prototype Model) Optimization
Task Distribution
Project Work is evenly distributed between both the members from Baseline Design till
the Optimized Design
Baseline Design
Simulations (Pilot 2 stages CFD/Hardware)
Optimized Design for Ramjet