The document provides specifications for a machine including:
1. The grindable workpiece area is 400x200mm.
2. The distance between the table top and upper limit switch is 366mm.
3. The maximum load is 130kg.
4. The main spindle drive has a speed range of 800-3300rpm.
5. The grinding wheel has a diameter of 300mm, widths of 25/30/50mm, and a bore hole of 51/76.2mm.
Turning and Boring
A specialized treatise for machinists, students in the industrial and engineering schools, and apprentices, on turning and boring methods, etc.
The document provides specifications for a machine including:
1. The grindable workpiece area is 400x200mm.
2. The distance between the table top and upper limit switch is 366mm.
3. The maximum load is 130kg.
4. The main spindle drive has a speed range of 800-3300rpm.
5. The grinding wheel has a diameter of 300mm, widths of 25/30/50mm, and a bore hole of 51/76.2mm.
The document provides specifications for a machine including:
1. The grindable workpiece area is 400x200mm.
2. The distance between the table top and upper limit switch is 366mm.
3. The maximum load is 130kg.
4. The main spindle drive has a speed range of 800-3300rpm.
5. The grinding wheel has a diameter of 300mm, widths of 25/30/50mm, and a bore hole of 51/76.2mm.
The document provides specifications for a machine including:
1. The grindable workpiece area is 400x200mm.
2. The distance between the table top and upper limit switch is 366mm.
3. The maximum load is 130kg.
4. The main spindle drive has a speed range of 800-3300rpm.
5. The grinding wheel has a diameter of 300mm, widths of 25/30/50mm, and a bore hole of 51/76.2mm.
[ 400x200 mm ] 2. Distance between top of table and upper limit switch . [ 366 mm ] 3. Maximum load . [ 130kg ] 4. Main Spindle Drive [ Speed range 800 – 3300 1/min ] 5. Grinding Wheel • Diameter 300 • Width 25/30/50 • Bore Hole 51/76.2 Knowledge On Type Of Axis Knowledge on type and grade of oil
• Standard designation: CGLP 220 / • Standard designation: HLP 22 /
ISO-L-G 220 ISO-L-HM-22 • JUNG-designation: JUNG-oil 220 • JUNG-designation: JUNG- • PSDC used: DN SUPER GEAR 220 hydraulic oil 22 • PSDC used: DN SUPER MULTI 32 Maintenance and service list
۞ 8 h / Daily
• Press the automatic lubrication key before starting work.
• Check that there is stick sufficient filter paper on the reel. • Check the socket and connecting cables of the magnetic chuck for damage. • Check the coolant concentration with the manufacturer’s specifications.
Turning and Boring
A specialized treatise for machinists, students in the industrial and engineering schools, and apprentices, on turning and boring methods, etc.