Professional Documents
Culture Documents
EEE 400 Presentation Template 1st Term
EEE 400 Presentation Template 1st Term
EEE 400 Presentation Template 1st Term
Presented by:
Presenter 1, Presenter 2, Presenter 3
Department of Electrical & Electronic Engineering
INDEPENDENT UNIVERSITY, BANGLADESH
Supervisor: Prof. Md. Abdur Razzak
Presenters’ short name Short Title Page 1/17
Outline
Background, Motivation and Objectives
Existing systems and related works (literature review)
Problems and challenges in the existing systems
Possible solutions and proposed system
Research Methodology
Proposed System
Work Plan
Expected outcome of the project
Impact of project on the
societal, health, safety, legal and cultural issues
environment and sustainability
Proposed budget for implementing the project
Addressing Complex Engineering Problems and Knowledge Profile
Summary
Presenters’ short name Short Title Page 2/17
Background and Motivation
Use a page or 2 to state the background of this project (preferably either pictorial or using block diagram)
and why you are motivated to pursue this project
2.
example
3.
5.
example
6.
After literature review, the following major problems are discovered and
needed to be addressed:
Xx
Xx
Xx
example
Design Making
Review Perform Analyze
using PSIM Hardware Experiment Results
Literature
Simulation Prototype
Depending on the
Final Term • Hardware implementation, testing and analyzing data situation hardware
• Final report submission (final) & presentation prototype may be
built.
3. Hardware components
cost
example 20,000
WP7 Interdependence
1.
example
Sajib Chakraborty, Mohammed Mahedi Hasan, ImaneOrighi, Omar Hegazy and M. A. Razzak, “Performance Evaluation
of a PID-controlled Synchronous Buck Converter Based Battery Charging Controller for Solar-Powered Lighting System
in a Fishing Trawler", Energies 2018, 11(10), 2722.
2. Sajib Chakraborty, Mohammed Mahedi Hasan and M. A. Razzak, “Transformer-Less Single-Phase Grid-Tie Photovoltaic
Inverter Topologies for Residential Application with Various Filter Circuits", Renewable and Sustainable Energy
Reviews, Vol.72, pp. 1152-1176 (2017).
3. Md. Md. Rezanul Haque, Saurav Das, Mohammad Rejwan Uddin, Md Saiful Islam Leon and M. A. Razzak,
“Performance Evaluation of 1kW Asynchronous and Synchronous Buck Converter-based Solar-powered Battery
Charging System for Electric Vehicles", 2020 IEEE Region 10 Symposium (TENSYMP 2020), 5-7 June 2020, Dhaka,
Bangladesh.
4. Saurav Das, Md. Md. Rezanul Haque and M. A. Razzak, “‘Development of One-kilowatt Capacity Single Phase Pure
Sine Wave Off-grid PV Inverter", 2020 IEEE Region 10 Symposium (TENSYMP 2020), 5-7 June 2020, Dhaka,
Bangladesh.
5. Md. Mahamudul Hasan, Arif Hossain, Noorjahan Akter Akhi and M. A. Razzak, “Design and Implementation of a Low
Cost Power Diagnosis Node for Monitoring the Standalone PV System in the Mockery of IoT”, Accepted for oral
presentation at the International Conference on Automation, Signal Processing and Control (iCASIC), 27-28 February,
2020, Vellore Institute of Technology, Vellore, Tamil Nadu, India.