Scribd Logo
Upload

Welcome to Scribd!

  • Charg 1

    Uploaded by

    damir
    4 views1 page
    The document describes the charging procedure for an ACS 600 system. It involves powering on the system and loading the program from FLASH to RAM. The capacitor is then charged to 300V while auxiliary power of 24V/15V is supplied to various boards from the POW board. Once the capacitor reaches 80% charge, the charging contactor is closed and thyristor pulses are used to control the incomer thyristors for 7-10 seconds during the final charging phase controlled by the control panel.

    Original Description:

    Original Title

    Charg1

    Copyright

    © © All Rights Reserved

    Available Formats

    PPT, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Report this Document
    The document describes the charging procedure for an ACS 600 system. It involves powering on the system and loading the program from FLASH to RAM. The capacitor is then charged to 300V while auxiliary power of 24V/15V is supplied to various boards from the POW board. Once the capacitor reaches 80% charge, the charging contactor is closed and thyristor pulses are used to control the incomer thyristors for 7-10 seconds during the final charging phase controlled by the control panel.

    Copyright:

    © All Rights Reserved
    Download as PPT, PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as ppt, pdf, or txt
    4 views1 page

    Charg 1

    Uploaded by

    damir
    The document describes the charging procedure for an ACS 600 system. It involves powering on the system and loading the program from FLASH to RAM. The capacitor is then charged to 300V while auxiliary power of 24V/15V is supplied to various boards from the POW board. Once the capacitor reaches 80% charge, the charging contactor is closed and thyristor pulses are used to control the incomer thyristors for 7-10 seconds during the final charging phase controlled by the control panel.

    Copyright:

    © All Rights Reserved
    Download as PPT, PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as ppt, pdf, or txt
    of 1

    ACS 600 Charging prosedure

    Udc = 80%
    Power- on

    loading and charging ready Udc


    Capacitor charging Udc=300V

    INT- board
    Auxiliary power 24V/15V POW- board
    for boards from
    POW- board Charging INP- board
    thyristor pulses for
    control incomer thyristors
    R5...R9
    AMC- board
    Program loading
    PROM FLASH--> RAM Close charging Control panel
    contactor CDP 311/312
    R2...R4 loading
    7...10 seconds

    IOC- board

    ACS 600 1 (xx)


    CHARGING.PPT, 10.1995

    You might also like