Professional Documents
Culture Documents
Siemens PLC Course
Siemens PLC Course
COURSE
Siemens PLC Families and Siemens
Training Institute
WHAT IS PLC
A PROGRAMMABLE LOGIC CONTROLLER(PLC)
is an industrial computer control system
that continuously monitors the state of
input devices and makes decisions based
upon a custom program to control the state
of output devices.
DEFINITION OF PLC
A programmable logic controller, PLC, or
programmable controller is a digital
computer used for automation of typically
industrial electromechanical processes, such
as control of machinery on factory assembly
lines, amusement rides, or light fixtures.
PLCs are used in many machines, in many
industries.
WHAT IS AUTOMATION
Automation or automatic control, is the use
of various control systems for operating
equipment such as machinery, processes in
factories, boilers and heat treating ovens,
switching in telephone networks, steering
and stabilization of ships, aircraft and other
applications with minimal or reduced human
intervention.
AUTOMATION BENEFITS
Quality and quantity increases also cost of
production decreases.
Less Wiring require as compare to relay logic.
Trouble shooting is very easy as compare to
Relay Logic.
SIMATIC
It is Siemens PLC and related components are
known as simatic.
STEP-5 FAMILY
Step 5 (Old PLC 1970-1980)
Always in white colour
Orange colour EPROM Card. Program written in
EPROM.
It has bucket for 3.2V cell.
EPROM program cannot downloaded directly
through cable. But it is downloaded like oven.)
It cannot online it self.
It supports A I/O, D I/O.
Relay logic cannot control A I/O’s.
It contain fast counters which counts upto 5kHz
STEP-7 FAMILY
LOGO
First siemens PLC is LOGO
It is used in Basic Level Projects.
It has 8DI, 4DO
It has built-in memory 32KB
It has small screen and keys for programming.
Its software name is LOGO soft comfort.
It price is about 35000.-Rs.
Cable for its programming is Logo PC
Cable.
LOGO
With LOGO basic level HMI can be
Connected.
LOGO used in ATS(Auto transfer supply), BMS(
Building Management System.)
Factories Light controlling system.
In traffic signals.
Logo support maximum I/O’s is 100
8 A I/O’s , 2-A outputs
All PLC operate on 24V DC
LOGO PLC
S7-200 SIEMENS PLC
It is basic to medium level PLC
Its CPU is CP224
It supports 14DI, 10DO. Maximum its
support 200 I/O’s
Software used for this is microwin
It’s price is 65000.-
Its support basic level SCADA.
S7-200 supports every type of HMI
S7-200 PLC
S7-200
For non siemens HMI. It require GSD file for compatibility.
Non-Siemens
HMI Siemens HMI
S7-200
Built-in memory is 32KB and 64KB
Memory card can also be inserted.
Water treatment plant.
Big level ATS
Printing Press
Cable used for programming is PPI (Parallel
Point interface) Cable.
In Siemens universal adapter is used for
every type of PLC.
It is also used in plants.
S7-300
It is used in medium level to high level
projects.
On board there is no I/O’s
No on board memory , memory card is must.
Never format your card from your PC.
CPU price is 100,000.-
Maximum I/O’s supported is 1024.
Connection can be done between CPU and
cards using bus connectors.
Software used for its programming is Simatic
Manager.
S7-300
Cable for S7-300 is MPI (Multi point interface).
Every HMI can be connected with S7-300.
S7-300 supports SCADA
It supports Master slave configuration.
Connection between master and slave and
slaves through profibus.
Profibus commuicate between 1-1.5KM
Slaves are not intelligent they just follow
instructions.
Profibus connector are used to connect to
CPU’s
S7-300
S7-300 mostly used in Power houses.
It is also used in nuclear, Submarine, and
F16.
Scan time of PLC is in msec.
S7-400
No input output module attach.
Software used is same Simatic Manager.
64KB built-in memory.
S7-400 Maximum I/O’s support is 2048
Its Price is 1,000,000
S7-400
S7-400 supports every type of HMI.
S7-400 every type of SCADA
MPI cable is used for programming.
Oil and gas have favorite PLC S7-400
Redundancy is supported.
Server PC has two hard disks. One for original
and one for Copy.
S7-1200
1212C S7-1200 CPU
8DI, 6DO, 2AI
64KB built in memory.
Memory card can be inserted.
S7-1200
Ethernet cable is used for programming.
Software for programming is TIA Potel
S7 300 S7 400 S7 1200 can be program.
FORMAT FOR READING
AC/DC/DC ( AC is input/PLC input operate on
DC/PLC output is DC
AC/DC/RLY (AC is input/PLC operate on
DC/RLY output of PLC)