Professional Documents
Culture Documents
Exam Skills 6 Method Writing
Exam Skills 6 Method Writing
Name all the apparatus and suggest a use. The keep going naming any apparatus
you might need and what it’s for.
Method Writing
If you’re going to say HOW, you need to know your
equipment
Method Writing
Food Tests
Use qualitative reagents to test for a range of carbohydrates, lipids and proteins. To include: Benedict’s test for sugars; iodine test for
starch; and Biuret reagent for protein.
Photosynthesis
Investigate the effect of light intensity on the rate of photosynthesis using an aquatic organism such as pondweed.
Food Tests
Use qualitative reagents to test for a range of carbohydrates, lipids and proteins. To include: Benedict’s test for sugars; iodine test for
starch; and Biuret reagent for protein.
Photosynthesis
Investigate the effect of light intensity on the rate of photosynthesis using an aquatic organism such as pondweed.
Method Writing
Electrolysis
Investigate what happens when aqueous solutions are electrolysed using inert electrodes.
This should be an investigation involving developing a hypothesis.
Temperature changes
Investigate the variables that affect temperature changes in reacting solutions, eg acid plus metals, acid plus carbonates, neutralisations,
displacement of metals.
Rates of reaction
Investigate how changes in concentration affect the rates of reactions by a method involving measuring the volume of a gas produced
and a method involving a change in colour or turbidity.
This should be an investigation involving developing a hypothesis.
Method Writing
You need to be able to describe how to do all of
the required practicals
Resistance
Use circuit diagrams to set up and check appropriate circuits to investigate the factors affecting the resistance of an electrical circuit.
This should include: the length of a wire (at constant temperature); combinations of resistors in series and parallel.
I-V characteristics
Use circuit diagrams to construct appropriate circuits to investigate the I-V characteristics of a variety of circuit elements including a
filament lamp, a diode and a resistor at constant temperature.
Density
Use appropriate apparatus to make and record the measurements needed to determine the densities of regular and irregular solid objects
and liquids.
Volume should be determined from the dimensions of regularly shaped objects and by a displacement technique for irregularly shaped
objects.
Dimensions to be measured using appropriate apparatus such as a ruler, micrometre or Vernier callipers.
Diagram
Method
Indicative content
• remove bung and add magnesium
• start stopclock / timer
• measure volume of gas at fixed time intervals
• repeat with different concentrations of acid
• control volume of acid
• control initial temperature of acid
• control amount / mass / length / particle size of magnesium
6
Method Writing 2
Method Writing – Mark Scheme 2
Level 3 (5–6 marks):
A full, detailed and coherent plan covering all the major steps is provided, which outlines what needs to be
measured to calculate specific heat capacity. The steps are set out
in a logical manner that could be followed by another person to calculate the specific
heat capacity.
Level 2 (3–4 marks):
The substantive content of a plan is present but may be missing some steps. The plan
may not be in a completely logical sequence but leads towards the calculation of the
specific heat capacity.
Level 1 (1–2 marks):
Simple statements relating to relevant apparatus or steps are made but they may not be
in a logical order. The plan would not allow another person to calculate specific heat capacity.
0 marks:
No relevant content.
Indicative content
• measure the mass of metal
• correct use of balance
• description of how work is done or energy transferred to metal
eg electrical work, mechanical work (eg dropping lead shot)
• how energy transfer or work done is measured
eg electrical using joulemeter, mechanical decrease in potential energy store of falling lead shot
• equate work done / energy transferred = increase in thermal energy store of the
metal
• calculate specific heat capacity
6
Method Writing 3
Method Writing – Mark Scheme 3
Level 3 (5–6 marks):
A full, detailed and coherent plan covering all the major steps is provided, which outlines
the apparatus required and sets out the steps needed in a logical manner that could be followed by another person to
produce a pure, dry sample of copper nitrate.
Level 2 (3–4 marks):
The substantive content of a plan is present but may be missing some steps. The plan
may not be in a completely logical sequence but leads towards the production of a pure,
dry sample of copper nitrate.
Level 1 (1–2 marks):
Simple statements relating to relevant apparatus or steps are made but they may not be
in a logical order. The plan would not allow another person to produce the sample.
0 marks:
No relevant content
Indicative content
• pour a suitable volume of nitric acid into a suitable container
• add a small amount of copper carbonate to the acid and stir until the effervescence stops
• continue to add small amounts of copper carbonate to the acid and each time stir until any effervescence stops
• eventually when there is no reaction / effervescence when the copper
carbonate is added filter the mixture to remove the excess copper carbonate
• pour the filtrate (copper nitrate solution) into an evaporating basin and heat to evaporate a small amount of the
water
• leave the copper nitrate solution to crystallise
• remove the crystals from the solution remaining and dry the crystals
6
Method Writing 4
Method Writing – Mark Scheme 4
Method Writing 5
Method Writing – Mark Scheme 5
Level 3 (5–6 marks):
A coherent method is described with relevant detail, which demonstrates a broad understanding of the relevant
techniques and procedures. The steps in the method are logically ordered. The method would lead to the production of
valid results.
Level 2 (3–4 marks):
The bulk of the method is described with mostly relevant detail, which demonstrates a reasonable understanding of the
relevant scientific techniques and procedures. The
method may not be in a completely logical order and may be missing some detail.
Level 1 (1–2 marks):
Simple statements are made which demonstrate some understanding of some of the relevant scientific techniques and
procedures. The response may lack a logical structure and would not lead to the production of valid results.
0 marks:
No relevant content
Indicative content
• description of how the apparatus would be used
• reference to control intensity of light / brightness
• use of ruler to measure distance of light from beaker / pondweed
• reference to varying colour of light or use of different filters
• plant releases gas / oxygen
• measure number of bubbles / volume of gas produced
• same length of time
• reference to control of temperature
• reference to control / supply of carbon dioxide in water
• do repeats and calculate a mean
6
Method Writing 6
Method Writing – Mark Scheme 6
Indicative content
Simple statements
• stir the solution
• use the same amount of each solution
• use the same concentration of solution
• put insulation or a lid on the beaker
• measure how high temperature goes
Coherent statements in a logical order
• pour a fixed, measured volume of the metal salt solution into a plastic / polystyrene cup
• measure and record the temperature of the solution
• stir and add 1 g of metal to the solution
• (put a lid on the cup)
• measure and record the temperature after a set time or measure and record
the greatest / highest temperature
• calculate and record the temperature increase
• (repeat each individual experiment at least two more times and calculate the mean temperature increase)
4