Professional Documents
Culture Documents
Umef - Sapra
Umef - Sapra
Umef - Sapra
TRADITIONAL BED 5
SHEETS & DUVET
1. Check the blanket if it is straight and secured
2. Position mattress protector and secure strings
3. With seams down, position bottom sheet
4. Miter bottom sheet – all four corners by:
-Tucking cover along foot and head of mattress
-Lifting corner flap – about 30cm from corner
-Tucking in remaining portion of cover
-Dropping flap and tucking in
5. Smooth out creases
6. With seams up, position top sheet – top edge even with
mattress at bed head
7. Position blanket – seams up
Bed Making (TRADITIONAL BED 5 SHEETS)
2. Secure the duvet cover. Once the duvet is inside the cover, you need to
secure it. If your duvet cover has ties, tie them together at each corner. If
your duvet cover has buttons, button them up. If your duvet cover has a
zipper, zip it up.
3. Prepare the duvet cover. Turn the duvet cover inside out and lay it flat
on the bed. The opening of the duvet cover should be at the foot of the
bed. If your duvet cover has ties or buttons, make sure they are undone.
Bed Making (DUVET)
4. Insert the duvet into the cover. Take your duvet and roll it up so that it’s
easier to handle. Then, insert the duvet into the cover. Make sure the
corners of the duvet are aligned with the corners of the cover.
5. Prepare the mattress. Smooth out the fitted sheet and any other sheets
you’re using. Make sure everything is tucked in neatly.
6. Arrange the duvet on the bed. Take the duvet and spread it out over the
bed. Make sure it’s centered and even on both sides.