Professional Documents
Culture Documents
Bài giảng buổi 6 - Thermocouple
Bài giảng buổi 6 - Thermocouple
( THERMOCOUPLE )
Consider a thermostatic enclosure which is kept at a constant
temperature Tu = 20 °C; the surrounding environment
temperature is T0 = 10 °C. The enclosure is heated using a heat
source which temperature is Ta (see Figure 1). To measure the
temperatures at these points, 3 Chromel-Alumel
thermocouples are used. The reference junctions for these
thermocouples are kept at the ambient temperature T0. 1.
Explain the principle of a thermocouple 2. List the names of
some other temperature transducers. 3. The thermocouple
measuring the temperature Tu is connected to the terminal of a
digital voltmeter, what should be the value of the displayed
voltage at the voltmeter screen? 4. Actually, the value displayed
by the voltmeter is 0,652 mV. Explain this result 5. The
voltmeter connected to the thermocouple measuring Ta
displays a voltage equal to 6.112 mV, what is the heat source
Temperature value
THERMOCOUPLE
𝑻
T1
𝑷 𝑨/ 𝑩
𝑇
𝑃 𝐴/ 𝐵 Sức điện động Peltier
Định luật về điên áp : Trong một mạch điện đẳng nhiệt
bao gồm nhiều vật liệu khác nhau , tổng sức điện động Peltie
sẽ bằng zero .
B Kết quả : = -
• Hiệu ứng Thompson :
Giữa hai điểm có nhiệt độ khác nhau trong cùng vật liệu dẫn điện sẽ tạo
thành hiệu điện thế chỉ phụ thuộc vào vật liệu và các giá trị nhiệt độ này
M N
A ( ()
Hiệu điện thế Thompson
=
V1
V2
ĐỊNH LUẬT CƠ BẢN
Sức điện động nhiệt điện cặp nhiệt chỉ phụ thuộc vào sự chênh lệch nhiệt độ
giữa hai mối nối .
ĐỊNH LUẬT VẬT LIỆU TRUNG GIAN
Isothrmal block
Ti Tj
ĐỊNH LUẬT VẬT LIỆU TRUNG GIAN
Ti Tj
Khi xen vào trong một nhánh một vật liệu dẫn điện
thứ ba , sẽ tạo thành hai mối nối mới Ti và Tj , nếu
muốn kết quả mạch đo không thay đổi thì Ti = Tj
ĐỊNH LUẬT NHIỆT ĐỘ TRUNG GIAN
HOẠT ĐỘNG CỦA ĐẦU ĐO CHUẨN
REFERENCE JUNCTION
0 0C 300C Tx
Volt kế đọc được giá trị 6.305 mV là emf ( Tx – 30 ) không phải emf ( Tx – 00 C ) nên không thể tra bảng để có Tx .
Muốn có : emf ( Tx – 0 ) = emf ( 30 – 0 ) + emf ( Tx – 30 ) = 1.196 mV + 6.305 mV = 7.501 mV .
Tra bảng và nội suy Tx = 165.5 0C
Khối đẳng
Mối nối đo nhiệt độ
nhiệt
V
J2
+
Σ
T Cảm biến nhiệt
+
dùng để bù
Mạch bù nhiệt
Qua thí dụ , nếu đầu đo ở nhiệt độ 1000C nhựng nhiệt độ điểm chuẩn ( đầu tự do ) là 250C thì thật sự
cặp nhiệt chỉ tạo ra sức điện động tương ứng 750C ( thiếu 250C ) . Như vậy muốn có sức điện động
tương ứng điểm nhiệt độ 1000C là phải bù vào bằng một sức điện động tương ứng với sức điện động
do cặp nhiệt tạo ra là .
Sức điện động cần bù này được tạo ra từ một mạch bù nhiệt độ cho đầu tự do , thường được tạo ra từ
một cảm biến nhiệt độ khác .
V1
V2
Gain and output scale factor: The small thermocouple signal is amplified
by the AD8495's gain of 122, resulting in a 5-mV/°C output signal
sensitivity (200°C/V).
A thermocouple (the right most tube) inside the burner
assembly of a water heater.
CẢM BIẾN IC NHIỆT LM 35