Professional Documents
Culture Documents
Lesson 9 PEC Installing Electrical Boxes
Lesson 9 PEC Installing Electrical Boxes
REVIEW
Non-metallic conduit
shall be rigidly
supported as
indicated below
SUPPORT EXPANSION FITTINGS JOINTS
MAXIMUM TRIMMING
Rigid nonmetallic
conduit larger than 150
mm (160mm) electrical
trade size shall not be
used.
Philippine
Electrical Code
LESSON 9 Provision in
Installing
Electrical Boxes
Philippine Electrical Code Provision
in Installing Electrical Boxes
Ceiling Boxes
They are also known as junction boxes or splice boxes.
They are used to anchor ceiling fixtures and serve as a
junction box where wires can meet and run to other areas of
the room.
They are either 4” octagonal or round shaped, and either 1-
1/2” or 2-1/8” deep.
They may also include adjustable mounting hangers that
attach to rafters in the ceiling and allow the box to be placed
anywhere in between.
PEC PROVISION IN INSTALLING
ELECTRICAL BOXES IN FINISHED SPACE
PEC PROVISION IN INSTALLING
ELECTRICAL BOXES IN FINISHED SPACE
Weather-proof Boxes
They are also known as an outdoor box.
They are used for exterior switches or
receptacles.
They are thicker than interior boxes and
have a rubber gasket between the cover
and the box to keep out water.
PEC PROVISION IN INSTALLING
ELECTRICAL BOXES IN FINISHED SPACE
PEC PROVISION IN INSTALLING
ELECTRICAL BOXES IN FINISHED SPACE
Wall Plates
They are known as faceplates or covers.
They are flat metal, plastic, or wooden
pieces that cover the openings in the wall
made by receptacles and switches.
Their openings in the cover match the type
and number, or receptacles or switches being
covered. Blank covers are also available
PEC PROVISION IN INSTALLING
ELECTRICAL BOXES IN FINISHED SPACE
PEC PROVISION IN INSTALLING
ELECTRICAL BOXES IN WIRING BOARD
PEC PROVISION IN INSTALLING
ELECTRICAL BOXES IN WIRING BOARD
➢ Boxes as fitting
➢ Utility box
➢ Fastening devices
➢ Laboratory board
PEC PROVISION IN INSTALLING
ELECTRICAL BOXES IN WIRING BOARD
➢ Gimlet ➢ Pencil
➢ Utility knife ➢ Keyhole saw
➢ Screwdrivers Philips Standard/flat
➢ Push-pull tape rule
➢ Claw hammer ➢ Ladder
Safety Rules and Practices during
Laboratory Work