Professional Documents
Culture Documents
LMC Fast-Set FFG Pp1, Pp2, Pp3 20240301
LMC Fast-Set FFG Pp1, Pp2, Pp3 20240301
P Series PP Series
(mini to midsize (mini to midsize SET WHILE
OPEN/CLOSE) RUN)
SPP Series
(Full servo driven)
Why
Easy maintenance access as it
opens and closes conventionally
As little as 3 min. setup time vs.
Latitude 15 min. for conventional
machine
Setup?
Strong engineering
Precision tolerance and high
quality parts
Thoughtful designs
High printing and folding quality
16
SUN’s triple or four wheel shaft box and transmission subject to model
type.
Automatic setup of air gates inside the vacuum box
23
Ink chamber dual blade system with ink tray – carbon fiber chamber
optional
35
LATITUDE MACHINERY CORP. Apr. 2015
Engineering Reserved Space for Dryer Installation by
Buyer In The Future
37
Pull
Pull Roll
roll
38
Ball screw shafts and linear bearing guide rails for head movement
Center slot head moveable
Double slot shafts for flexible order change
Scorer roll shafts, special precreaser and creaser profile
Replaceable PU rings for female precreaser and creaser rolls
Glue tab knife steel to steel design
Sheet travel direction scrap conveyor
Solid universal joint shaft instead of chains for slot head movement
Double slotter configuration available for PP2 and PP3
49
55
59
65
70
71
72
ALARM SCREEN
LATITUDE MACHINERY CORP.
What’s New!
Pre-Crease
Score
Twin Box
100-
Noise Level 100-105DB 85-95DB 100-105DB 85-90DB 85-90DB
105DB
30% 30%
Registration 30% Improved Improved Improved
Registration Registration Registration
Setup time 90 sec. 60 sec. 140 sec. 75 sec. 160 sec. 90 sec.
Servo Gear
Lead edge to 1 st print ≤ +/ 1mm ( 2 .00mm Delta=1mm Lead edge to 1 st print ≤ +/ 1.5mm (3.00mm total)
Lead edge to die cut ≤ +/ 1.5 mm Lead edge to die cut ≤ +/ 2mm
Delta=1mm
( 3 mm total) (4mm total)
Lead edge of box to end of lead slot ≤ +/ 1 .5 mm Lead edge of box to end of lead slot ≤ +/ 1.5mm
Delta=0.0mm
( 3 mm total) (3mm total)
Lead edge of box to end of trail slot ≤ +/ 1.5 mm Lead edge of box to end of trail slot ≤ +/ 2mm
Delta=1mm
( 3 mm total) (4mm total)