Professional Documents
Culture Documents
Xinxing 4 in 1 Laser Welding Machine
Xinxing 4 in 1 Laser Welding Machine
Xinxing 4 in 1 Laser Welding Machine
com
4 IN 1 LASER WELDING
MACHINE
Jinan Xinxing CNC Machinery Co., Ltd. www.xinxinglaser.com
CONTENT CONTENS
S
1.Brief Introduction
2.Laser Source
3.Chiller
4.Wire Feeder
5.Advantages
Jinan Xinxing CNC Machinery Co., Ltd. www.xinxinglaser.com
Brief
Introduction
Jinan Xinxing CNC Machinery Co., Ltd. www.xinxinglaser.com
※ 以上技术参数仅供参考,以实物为准 ;
Jinan Xinxing CNC Machinery Co., Ltd. www.xinxinglaser.com
Jinan Xinxing CNC Machinery Co., Ltd. www.xinxinglaser.com
Raycus/MAX
Laser
Source
Jinan Xinxing CNC Machinery Co., Ltd. www.xinxinglaser.com
HMI
Handheld laser welding human-machine interface ( HMI)
adopts 7-inch configuration TFT touch screen, with beautiful
LASER SOURCE
CONTROL interface and easy operation. Laser-related parameters can be
SYSTEM set separately, and the input and output IO status, alarm
Superlaser
Jinan Xinxing CNC Machinery Co., Ltd. www.xinxinglaser.com
Craft Base
10 suggested thickness
settings for every material
and 5 customization settings
Jinan Xinxing CNC Machinery Co., Ltd. www.xinxinglaser.com
1 、 Welding
Welding Type : Continuous/Pulsed
2. Cutting
3. Dust Removal
4. Seam Cleaning
5. Battery Welding
Jinan Xinxing CNC Machinery Co., Ltd. www.xinxinglaser.com
2 、 Cutting
Jinan Xinxing CNC Machinery Co., Ltd. www.xinxinglaser.com
3 、 Dust Removal
Jinan Xinxing CNC Machinery Co., Ltd. www.xinxinglaser.com
SWIFT NOZZLE
Please note that the red dot on the dust removal lens
should face up when changing it
Jinan Xinxing CNC Machinery Co., Ltd. www.xinxinglaser.com
4 、 Seam Cleaning
Intelligent Monitoring
·Temperature alarming
·Lens Shaking Alarming
·Mode Changing Check
Jinan Xinxing CNC Machinery Co., Ltd. www.xinxinglaser.com
S&A
4.
Single Route Wire Feeder/Double
Routes Wire Feeder
Wire Feeder
Jinan Xinxing CNC Machinery Co., Ltd. www.xinxinglaser.com
1. Multifunctional welding machine: The 4-in-1 laser welding machine provides four functions
of welding, cutting, dust removal, and weld seam cleaning. Equipped with various types of
5.
nozzles, it is convenient to change different modes. The welding thickness can be up to
8mm, and the cleaning width can be up to 100mm, meeting all your welding needs.
2. Double pendulum handheld welding: The welding head uses dual motors to drive the X-
and Y-axis vibration lenses. It has 6 swing modes and can weld larger gaps to meet the
needs of different welding patterns. Compared with a single axis pendulum, the fault
tolerance rate is higher, the filling effect is better, and the welding is stronger.
3. Intelligent temperature control alarm: The machine will perform temperature control
Advantages monitoring in real time when it is working. There is a double-layer lens protection inside
the welding gun. If the temperature exceeds 50℃, an alarm will be triggered in time to
prevent damage to the lens or even the nozzle and reduce overall losses.
4. Under-pressure alarm: It has real-time protective gas pressure monitoring to avoid poor
welding results, waste of materials, and even damage to the entire system when the
protective gas is exhausted.
5. Simple operation: For those who are already engaged in the welding industry, after
learning the machine parameters and hardware settings, you can practice using the
welding machine in less than five minutes. For someone who has never been in the
welding industry, it only takes half an hour to master the welding gun. Easy to use and
suitable for automated production lines.
Jinan Xinxing CNC Machinery Co., Ltd. www.xinxinglaser.com
5.
which can effectively prevent the optical part from being contaminated by
dust. At the same time, the protective lenses adopt a drawer-type
structure, which is easy to clean and replace.
Advantages 8. Low failure rate: Our 4 and 1 double pendulum welding machines are
designed with stable performance and multiple intelligent monitoring
systems. You don’t have to worry about the failure rate. We will also
provide you with ongoing after-sales issues.