implementation of the 12-bit PDP-8 instruction set, along with a range of peripheral support and memory ICs developed by Intersil in the mid-1970s. It was sometimes referred to as the CMOS-PDP8. Since it was also produced by Harris Corporation, it was also known as the Harris HM-6100.
This relatively popular microprocessor family was manufactured
in white, purple and plastic versions by both Intersil and Harris Semiconductor. KEY FEATURES
CMOS Technology: Unlike most Registers: The 6100 is a 12-bit
of its contemporaries, the 6100 family CPU that has three primary was produced using CMOS rather registers: PC (Program Counter), than the bipolar and NMOS 12-bit AC (Accumulator), and MQ technologies. This resulted in (Multiplier Quotient). relatively low power consumption and could be operated from a single supply over a wide range of 4 – 11 V. KEY FEATURES Memory: Instruction Set:
The 6100 has a 12-bit The 6100 used the same
data/address bus, limiting RAM instruction set as the popular to only 4 K words, or 6 KB. PDP-8 series of minicomputers, Memory references are 7-bit, making it suitable for use in offset either from address 0, or embedded systems that had from the PC page base previously used discrete logic address. circuits. SPECIFICATIONS 8 MHz clock speed The data memory 12-bit CPU that size is 4K words operated from a closely emulates the single supply over PDP-8. the wide range of 4– 12-bit address bus 11 V. low power expanding memory to consumption, less 32K than 100 mW ARCHITECHTURE Executes PDP-8/E, Instruction Set Direct, Indirect, and Autoindexed Memory Addressing 12-Bit Memory Accumulator ADD Instruction IM6100 5fLsec @ +5 volts/4.0 MHz IM6100A 2.5fLsec @ +10 volts/8.0 MHz IM6100C 6fLsec @ +5 volts/3.3 MHz Input-Output Instruction IM6100 IM6100A IM6100C 8.5fLsec @ +5 volts/4.0 MHz 4.25fLseC @ +10 volts/8 MHz 10.2fLsec @ +5 volts/3.3 MHz Single-Clock, Single-Instruction Capabilityo Interrupt Dedicated Control Panel Features APPLICATIONS Intelligent Computer Instrumentation Terminals Medical Electronics POS Terminals Displays Traffic Portable Terminals Control Navigation Aerospace/Satellite System Automotive Systems Remote Data Acquisition Systems Process Control THANK YOU