Professional Documents
Culture Documents
Pneumatic Circuits Using Double Acting Cylinders
Pneumatic Circuits Using Double Acting Cylinders
Pneumatic Circuits Using Double Acting Cylinders
Valve
Thumb Rules for Pneumatic & Hydraulic Circuit Design using Double Acting Cylinder
1. Use 5/2 way D.C.Valve as “Final Control Element” for operating Double Acting Cylinder.
2. Use 3/2 way D.C.Valve for Indirect Actuation of 5/2 way D.C.Valve.
3. If advance time or retraction time of piston (say 1 minute) is given, Use one way flow
control valve.
4. If advance or retraction stroke is due to pressing of any one of two pushbutton,
always use “OR Valve( Shuttle Valve)”.
4. If advance or retraction stroke is due to pressing of two pushbutton at a time
(Simultaneously), always use “AND Valve( Two Pressure or Twin Pressure Valve)”.
5. Use Roller actuated 3/2 way D.C.Valve (Indirect Actuation of 5/2 way D.C.Valve) for
“AUTOMATIC ADVANCE or RETRACTION)
6. To advance or retract piston with full (or maximum) possible speed in minimum
time, use “Quick Exhaust Valve”.
7. To stop or halt the piston in advance position or retracted position, use “Time Delay
Experiment No 6 ( Pneumatic Circuit on next slide)
• Object : • उद्देश्य
A Double Acting Cylinder has it’s piston
initially in retracted position. एक डबल एक्टिंग सिलेंडर का पिस्टन प्रारंभ मे
रिट्रेक्टेड स्थिती मे है |
As one pushbutton is operated,piston starts
advancing and completes the advance
stroke in 1 minute. एक पुशबटन दबाने पर, पिस्टन अपनी एडवांस गति प्रारंभ करता है और 1 मिनट
में एडवांस स्ट्रोक पूर्ण करता है |
Even after this pushbutton is released,
piston remains in advance position.
इस पुशबटन को अब छोड़ने पर भी पिस्टन एडवांस स्थिति मे ही रहता है |
Pressing of another pushbutton causes
retraction of the piston in 2 minutes दुसरे पुशबटन को दबाते ही पिस्टन अपनी रिट्रेक्टेड गति प्रारंभ करता है और 2
bringing the piston back to initial retracted
Experiment No 7 ( Pneumatic Circuit on next slide)
(Pressing of Any one of 2 Pushbuttons - OR Valve)
• Object : • उद्देश्य
A Double Acting Cylinder has it’s piston initially in एक डबल एक्टिंग सिलेंडर का पिस्टन प्रारंभ मे
retracted position.
रिट्रेक्टेड स्थिती मे है |
Due to “Pressing of any one of two
pushbuttons” , piston starts advancing and “किन्ही 2 पुशबटनों मे से कोई भी एक पुशबटन दबाने पर”, पिस्टन अपनी एडवांस
completes the advance stroke in 1 minute. गति प्रारंभ करता है और में 1 मिनट एडवांस स्ट्रोक पूर्ण करता है |
Even after any one or both pushbuttons are इन दोनों या इनमे से कोई भी एक पुशबटन को अब छोड़ने पर भी पिस्टन एडवांस
released, piston remains in advance position. स्थिति मे ही रहता है |
• Object : • उद्देश्य
A Double Acting Cylinder has it’s एक डबल एक्टिंग सिलेंडर का पिस्टन प्रारंभ मे
piston initially in retracted position.
रिट्रेक्टेड स्थिती मे है |
• Rule No 3 – Use symbol of “oil • नियम क्रमांक 3 - सभी 3/2 DC valve और 5/2 DC valve
reservoir” below dark inverted triangle के सभी exhaust ports ( पोर्ट ”R” और पोर्ट “S”) पर उलटे
at all exhaust ports ( Port “R” and port डार्क traingle के निचे “oil reservoir” का बनाये |
“S”) of all 3/2 way DC Valve and 5/2
Convert a Pneumatic Circuit into a Hydraulic Circuit
Hydraulic Circuit of Experiment No 10