Professional Documents
Culture Documents
Mixing Tank Cleaning
Mixing Tank Cleaning
MIXING TANK
CLEANING PROCEDURE
MIXING TANK
MIXING TANK
INLET FROM
CENTRAL OUTLET TO
GT SAMPLING
STATION
MIXING TANK
PERSONAL PROTECTIVE
EQUIPMENT
HAIRNET & CAP
APRON
BLACK PANTS
BLACK SHOES
CLEANING TOOLS
GREASE BOX
CGT/MT PRESSURE
SKIMMER WASHER
GARDEN HOSE
CLEANING TOOLS
9:00 AM
11:00 AM Follow steps #1-11 of the cleaning procedure
1:00 PM for the FIRST Chamber of mixing tank only
10:00 PM or closing
Follow steps #1-11 of the cleaning procedure
to BOTH chambers (1st and 2nd chambers) of
mixing tank
CLEANING TOOLS
IMPORTANT! Prepare first the following:
Grease box lined with two (2) black
Ice cubes
garbage bags
MIXING TANK
CLEANING PROCEDURE
STEP #1
STEP #2
STEP #3
STEP #4
Once half-filled, tie the
garbage bag properly to
avoid spillages then
transfer to the garbage
room for pick-up by the
garbage collector
Operating
MT CLEANING PROCEDURE: Hours
STEP #5
Pour 1 cup (containing 10
sachets) of APS powder all
over the 1st chamber of
mixing tank
STEP #5
NOTE:
It is recommended to
transfer first the contents
of the 10 sachets of APS
into a 2.5 oz cup. Then,
using the powder in the
cup, evenly pour in APS to
the surface of the
wastewater in the
chambers of the Mixing
Tank.
Operating
MT CLEANING PROCEDURE: Hours
STEP #6
After 20 minutes, using
CGT/MT skimmer, scoop
out the sludge/
precipitates that
accumulated at the
surface of the
wastewater in the 1st
chamber of mixing tank.
Operating
MT CLEANING PROCEDURE: Hours
STEP #7
Dispose collected
sludge/precipitates into
the grease box
Operating
MT CLEANING PROCEDURE: Hours
STEP #8
Tie the garbage bags
from the grease box
properly to avoid
spillage.
Transfer it to the
garbage room for pick-
up by the solid
waste/garbage collector.
MIXING TANK
CLEANING PROCEDURE
STEP #1
STEP #2
STEP #3
Lift out the filter
media (orange electrical
conduits)
STEP #4
STEP #5
STEP #6
Once half-filled, tie the
garbage bag properly to
avoid spillages then
transfer to the garbage
room for pick-up by the
garbage collector
Closing
MT CLEANING PROCEDURE: Hours
STEP #7
Pour 1 cup (containing 10
sachets) of APS powder all
over the 1st chamber and
2nd chamber of mixing tank
STEP #7
NOTE:
It is recommended to
transfer first the contents
of the 10 sachets of APS
into a 2.5 oz cup. Then,
using the powder in the
cup, evenly pour in APS to
the surface of the
wastewater in the
chambers of the Mixing
Tank.
Closing
MT CLEANING PROCEDURE: Hours
STEP #8
After 20 minutes, using
CGT/MT skimmer scoop
out the sludge/
precipitates that
accumulated at the
surface of the
wastewater in the 1st
and 2nd chambers of
mixing tank.
Closing
MT CLEANING PROCEDURE: Hours
STEP #9
Dispose collected
sludge/precipitates into
the grease box
Closing
MT CLEANING PROCEDURE: Hours
STEP #10
Tie the garbage bags
from the grease box
properly to avoid spillage.
END