Professional Documents
Culture Documents
By: Mr. Gravitt
By: Mr. Gravitt
Inventor
Assignment 6
Sweeping a Helix
Part 2 of 3
By: Mr. Gravitt
STEP 1 - Your Folder on the
Schools Server Make a Folder
for Lesson 6 Sweeping a Helix
Step 2 Select Create a New Part
Step 3 Name & Save the Part
Step 4 Save it in the folder you just
made, Name it Lesson 3 Lofting, & then
Click Save
Step 4.2 Now the Part is
Named & Saved
Step 4.3 Now anytime you
want to save all you have
to do is click the save
button
Step 5.1 - Blank Part
• Inventor has a
Thread Tool!
• However…
Step 8.2 – Inventor’s Thread Tool
• It “puts” threads on really quickly
& easily!!!
• However, please NOTE: it only
puts the threads in the drawing!!!
• The Threads Will Not Print, these
threads just appear & are noted in
the drawing as threads.
• For instance, if you try to 3D print
them, they will NOT print!
Step 8.3 – Inventor’s Thread Tool
• When you
click Thread.
• Inventor’s
Thread Tool
Pop-Up Box
should
appear.
Step 8.4 – Inventor’s Thread Tool
• Click on
Surface
• Then Select
the Surface
you would
like threads
placed on.
Step 8.5 – Inventor’s Thread Tool
• I Placed 3/8-16
Pitch ANSI Coarse
Threads on this
Bolt Shaft.
• Placed them for
the full 2 inch
length of the
shaft.
Step 8.6 – Inventor’s Thread Tool