Professional Documents
Culture Documents
CE 323-PSD - M2 - T2 - W3.part 2
CE 323-PSD - M2 - T2 - W3.part 2
CE 323-PSD - M2 - T2 - W3.part 2
BOLTED AND
RIVETED
Insert image
CONNECTIONS
ENGR. CHEZANIE MIYA S.
ASUNCION
ALPINE2_TOPIC
MODULE SKI HOUSE
2_WEEK 3
Example Problem 1: COMBINED SHEAR AND
TENSION
Determine the adequacy of the fasteners in Figure below when a 22-mm-diameter A325
bolts are used in bearing-type connection with threaded excluded from shear planes.
Assume the strength of the column flange and the ST section does not govern the strength.
5 𝑃𝑥
𝑃𝑦 500𝑘𝑁 ALPINE2_TOPIC
MODULE SKI HOUSE
2_WEEK23
Example Problem 1: COMBINED SHEAR AND
TENSION
Solution:
• Adequacy of the fasteners • Shear Stress
Px = 400 kN fv=207 MPa
Py = 300 kN Computed shear stress of the figure (use Py)
ALPINE
MODULESKI HOUSE
2_TOPIC 3 3
2_WEEK
Example Problem 1: COMBINED SHEAR AND
TENSION
Solution:
• Tensile Stress
From Table 2-7, allowable tensile stress of bolt
ALPINE
MODULESKI HOUSE
2_TOPIC 4 3
2_WEEK
Example Problem 2: ECCENTRIC SHEAR
Determine the shear force on the most stressed fasteners in the figure below if P= 1,000
kN.
ALPINE
MODULESKI HOUSE
2_TOPIC 5 3
2_WEEK
Example Problem 2: ECCENTRIC SHEAR
Solution:
• There are two identical plates, therefore the Load P will be
divided into 2 which is equal to P=1000/2 Kn=500 Kn each
plate.
P Load due to moment
y E=290 mm P=500 kN
200 mm
90 mm 𝑅𝑇 5
5 1
𝑅𝑇 1
80 mm
Rd Rd 𝑅𝑇 6
120 cg
6 2 cg 𝑅𝑇 2
cg
40 mmx
40 mm
40 Rd Rd 𝑅𝑇 7
7 3
80 mm Rd Rd 𝑅𝑇 3
8 4 𝑅𝑇 8
Rd Rd 𝑅𝑇 4
Direct load ALPINE
MODULESKI HOUSE
2_TOPIC 6 3
2_WEEK
Example Problem 2:
Solution:
𝑅 𝑇𝑥 1
• DIRECT LOAD 𝑅𝑑 𝑅1
𝑅 𝑇𝑦 1
Considering bolt 1: ( x=90, y=120)
ALPINE
MODULESKI HOUSE
2_TOPIC 7 3
2_WEEK
Example Problem 2:
Solution:
𝑅 𝑇𝑥 1
𝑅𝑑 𝑅1
𝑅 𝑇𝑦 1
=212,337.27 N or 212.34 kN
ALPINE
MODULESKI HOUSE
2_TOPIC 8 3
2_WEEK
THE
MEASURE
OF
INTELLIGE THANK
NCE IS Insert
THE image YOU
ABILITY TO QUIZ NO. 2 NEXT MEETING
CHANGE. –
ALBERT
EINSTEIN
ALPINE SKI HOUSE
Example Problem 2: ECCENTRIC SHEAR
Solution:
• There are two identical plates, therefore the Load P will be
divided into 2 which is equal to P=1000/2 Kn=500 Kn each
plate.
P Load due to moment
P
200 mm
𝑅𝑇 5
4 1
𝑅𝑇 1
Rd Rd 𝑅𝑇 6
cg
cg 𝑅𝑇 2
5 2 Rd Rd 𝑅𝑇 7
Rd Rd 𝑅𝑇 3
3
𝑅𝑇 8
Rd Rd 𝑅𝑇 4
Direct load ALPINE
MODULESKI HOUSE
2_TOPIC 10 3
2_WEEK