Professional Documents
Culture Documents
Embedded System PPT Presentation
Embedded System PPT Presentation
A Project On
“IOT BASED MONITORING AND CONTROL OF AN INDUCTION
MOTOR”
SUBMITTED IN PARTIAL FULFILMENT OF THE REQUERTIMENTS FOR THE DEGREE OF
BACHELOR OF ENGINEERING IN
ELECTRICAL AND ELECTRONICS ENGINEERING
Under the Guidance of
Mrs ASHALATHA.P(M Tech)
Presented by
SANJANA G T 3NG20EE004
GIRISH B N 3NG21EE403
HALESH H S 3NG21EE404
SUCHITRA H T 3NG21EE410
YOGEESH S B 3NG21EE412
CONTENTS
1. INTRODUCTION
2. AIM AND OBJECTIVES
3. BLOCK DIAGRAM
4. COMPONENTS
5. WORKING
6. ADVANTAGES
7. DISADVANTAGES
8. APPLICATIONS
9. FUTURE SCOPE
10. CONCLUSION
11. REFERENCE
INTRODUCTION
Presently Induction Motor is the most common type of motor in all over
fields.
In industry 90% of uses the induction motor because of necessary
characteristics such as it is inherently ‘self-start’ motor.
The essential advantage part of an Induction motor is that its speed can
be control easily as it has good speed regulation, sustainable overload
capacity, and high starting torque.
Due to all of these advantages, Induction Motor is frequently used in an
all-over application like industry, electric train, electric Vehicles, crane,
elevator, domestic, agriculture motors, etc.
AIM OF THE PROJECT
The aim of a project on monitoring and controlling an induction motor using IoT is
to enhance efficiency and reliability.
It involves integrating sensors to monitor motor parameters, transmitting data
through IoT for real-time analysis, and implementing controls for remote operation.
This can lead to better energy management, predictive maintenance, and overall
OBJECTIVES
Easy to use
Can measure the speed and distances
Using IoT we can monitor and analysis the data.
Remote monitoring.
Energy efficiency
DISADVANTAGES
Complexity of implementation
Compatibility Issues
APPLICATIONS
Industrial Automation
Smart Agriculture
Energy management
HVAC System
Remote monitoring in agriculture
FUTURE SCOPE
Implementing reliable and secure communication protocols (e.g., MQTT, CoAP) for seamless
data transfer between sensors, actuators, and the IoT platform. Cloud-Based Platform:
Utilizing a cloud-based platform for data storage, analysis, and visualization. Implementing
scalability to accommodate increasing data volumes. Remote Control:
Enabling remote control functionalities, allowing users to start, stop, and adjust motor settings
from a centralized interface. Predictive Maintenance:
CONCLUSION
Ankara, Turkey.
“Remote Controlling and monitoring of Induction motors using internet, Abdulkadir, Cakır,
Hakan Cali’s, Gokhan Turan Suleiman Demirel University, Faculty of Technology, Department
Research on remote wireless monitoring system based on GPRS and MCU”, Zhong-Xuan, J.
Xiau-Yu, H. Zhao-Fu, Z. Yan-Tao, D. Meng, Int. Conf. Computational Problem Solving ICCP
Akatsu K. And Kawamura A., (1999), -Sensor less very low and zero speed estimations with
on-line secondary resistance estimation of induction motor without adding any signal, Proc. IEEE Ind. Applicant. Soc.
Annual. Meeting, pp. 187-193.
THANK YOU