Professional Documents
Culture Documents
New CEDO-RT Security Transport Packaging &procedure Req For Gamma
New CEDO-RT Security Transport Packaging &procedure Req For Gamma
Every licensee who possesses, uses or produces either a sealed source containing 50 MBq
or more of a nuclear substance or a nuclear substance as shielding shall, at the following
times, conduct leak tests on the sealed source or shielding using instruments and
procedures that enable the licensee to detect a leakage(of nuclear sub.) of 200 Bq or less:
(a) where the sealed source or shielding is used after being stored for 12 or more
consecutive months, immediately before using it;
(b) where the sealed source or shielding is being stored, every 24 months;
(c) where an event that may have damaged the sealed source or shielding has occurred,
immediately after the event; and
(d) in all other cases, (i) where the sealed source or shielding is located in a radiation
device, every 12 months, and (ii) where the sealed source or shielding is not located in a
radiation device, every six months.
Immediately following the leak test the person conducting the analysis shall complete the
leak test record, retain a copy and send the original to the licensee. The person shall
immediately advise the licensee and CNSC if a sealed source has contamination which
exceeds the leakage criterion of 200 Bq.
Classes of Installations
• Enclosed installations
• Unattended installations (automatic equipment)
• Open Installation
– Posted radiation area at 0.1 mSv/h; and .025
mSv/h
– The equipment must be un-accessible to
unauthorized use
• Protective installation (Exposure Room) -video
– Safety interlocks to prevent access to
exposure site when in use
– Visible or audible warning signal when in use
– Emergency / Scram button
– 5 cm outside the surface of the enclosure
cannot exceed 5 μSv/h
– Warning signs must be posted
• Issued by
employer
Consignors’ Roles and Responsibilities
Consignors
• If a consignor is transporting radioactive materials that meet the
requirement for an Emergency Response Assistance Plan (ERAP) (see
Part 7 and Column 7 of Schedule 1 of the TDG), that consignor must
have an ERAP approved by Transport Canada.
• An ERAP describes what would be done in the event of a
transportation incident. The plan is intended to assist local
emergency responders by providing them with technical experts and
specially trained/equipped emergency response personnel at the
scene of an incident.
• Examples of consignors that transport radioactive material include
nuclear electricity generating stations or hospitals shipping nuclear
medicinal waste. 10
Transportation of Radioactive Materials
Packaging
• All packages used for the transport of radioactive material must meet certain
safety and performance requirements as stated in IAEA regulations.
• The objectives of the regulations are to protect the health and safety of
persons and the environment.
* The design of these package types must be certified by the Canadian Nuclear Safety
Commission before they can be used.
17
Transportation of Radioactive Materials in Ontario Information Package, Prepared by the Ministry of
Transportation and Ministry of Community Safety and Correctional Services. Excepts taken in 2018 from
publicly available copy,
Province of Ontario
• The Provincial Nuclear Emergency Response Plan provides the framework
for the overarching nuclear emergency response for the Government of
Ontario and governs the response to nuclear and radiological emergencies
in the province.
• The Province can provide coordination and support for the emergency
response to a transportation incident involving radioactive material.
• Various provincial ministries have responsibilities under Order in Council
1157/2009 to respond to radiological and/or transportation incidents.
Transportation of Radioactive Materials
Packaging: Excepted, Industrial, and Type A
• The contents of these packages pose minimal threat to public health and safety
based on their radioactive levels.
• Industrial and Type A packages are designed to withstand a series of tests that
simulate normal conditions of transport without loss of content and with limited
increase to the dose rate on the exterior of package.
• Some of the tests these packages must be able to pass include:
Drop test: A 1.2- Penetration test: Water spray test: Stacking test
metre (47 in) drop dropping a metal simulating rain fall
test onto an bar onto the
unyielding surface package
Transportation of Radioactive Materials
Types of Packaging
Type Use Example Photo
Excepted Package Transport very small • Empty packages
quantities of radioactive previously containing
materials radioactive material
• Smoke detectors
• Medical isotopes
Medical Isotopes Container
23
Transportation of Radioactive Materials
Packaging: Type H, Type B (RED) and Fissile Material
• Type B packages are very robust with radiation shielding, and remain intact even
under accident conditions of transport.
• Type B packages must withstand the same normal transportation conditions as
Type A packages, as well as testing to simulate accident conditions.
• Packages used to transport fissile material must remain sub-critical when
subjected to the tests for Type B packages.
• Before these packages can be used in Canada they require certification by the
CNSC by undergoing stringent testing, including:
24
Transportation of Radioactive Materials
Types of Packaging
Type Use Example Photo
Type H Transport uranium • UF6 is a compound
hexafluoride (UF6) used in the uranium
enrichment process
that produces fuel
for nuclear reactors
Type H Package
25
•Type A packages: used to transport small quantities
of radioactive material with higher concentrations of
radioactivity than those shipped in industrial
packaging
They are typically constructed of steel, wood,
or fiberboard, and have an inner containment
vessel made of glass, plastic, or metal
surrounded with packing material made of
polyethylene, rubber, or vermiculite.
Examples of material typically shipped in Type
A Packages include nuclear medicines
(radiopharmaceuticals), radioactive waste, and
radioactive sources used in industrial
applications.
Type A packaging and its radioactive contents
must meet standard testing requirements
designed to ensure that the package retains its
containment integrity and shielding under
normal transport conditions.
Type B package can have designations “(U)” or “(M)” (e.g., Type B (U)
or Type B (M))
oU = Unilateral: the package design is approved by the country of
origin.
Package
Identification
Labels
•Examples of 5 different types of paper
labels are shown with the explanation
when they are used.
•They are used only on packages
containing (or formerly containing)
radioactive materials.
•Standard paper label size is about 4
inches by 4 inches and is displayed “on
point”.
•Labels are NOT the same as markings
required on REDS or placards for
Transport
Labels include the following
information
•Label types (5): Radioactive White-I, Radioactive Yellow-II, Radioactive Yellow-III,
Fissile, Empty
•Radioactivity trefoil appears on the first 3 label types listed above
•A yellow background appears under the trefoil for only these labels
•Radioactive Yellow-II
•Radioactive Yellow-III
•Contents: radioactive isotope (e.g., Cs-137, Ir-192, etc.)
•This information is listed only on Radioactive I, II, and III labels.
•Activity: activity level in becquerels (Bq) or curies (Ci).
•This information is listed only on Radioactive I, II, and III labels.
•Transport index (TI)
•Transport index is located in the black bordered rectangular box just
above the radiation Class number “7”.
•The transport index is determined by the shipper that helps provide
control over radiation exposure and establish transport controls.
•Only Radioactive Yellow-II and Radioactive Yellow-III labels must show
the transport index.
•Radioactive Yellow-II label can be used for up to 1.0 mrem/hr @1 meter.
• The transport index is determined by taking the maximum radiation level (as measured in
mrem/hr) at one meter (3.3 feet) from an undamaged package.
• The Transport Index (TI), which provides an indication of a package’s radiation levels, can be used to control
exposure to radiation. It is calculated as follows: TI= Maximum radiation level, in µSv/h, at 1 m from the
package divided by 10.
• Note: When dealing with a radioactive package, multiply the TI on the label by 10 to quickly determine the
maximum radiation level at 1 m from the package. Sample TI calculation: If the TI on the package’s label was
5, the maximum radiation reading would be 50 µSv/h at 1 m from a package. A TI of 10 is the highest that
would be encountered and should be considered the worst case scenario.
• When assessing a package’s integrity at an accident scene, this information can be used as a
baseline for determining if damage has occurred to the package
• For example, a TI of 0.2 would indicate that, at 1 meter from the labeled package, the
radiation dose rate should be no more than 0.2 mrem/hr (0.002 mSv/hr).
• CAUTION: Be aware that other radioactive material packages in the immediate vicinity may
interfere with measurements, resulting in radiation levels above the indicated transport index
of any particular package.
I-White
Extremely low radiation
levels
II-Yellow
Low radiation levels
III-Yellow
Higher radiation levels
31
IN CANADA : All packaging labels must have The additional text under the word
“RADIOACTIVE”:
CONTENTS CONTENU
ACTIVITY ACTIVITÉ
INDICE DE TRANSPORT INDEX
38
• Lockable
• 0.02mSv/hr outside storage-
transport box/area & 0.02 mSv/hr
max in cabin. Only driver and
passenger to be CEDO/EDO. No
public non-news.
• Certificates
• Direct surveillance
• Licence and certificates posted/with you
Security Procedures according to 5 security categories of sources:
A secure container:
a. shall be made of steel or any other material that is resistant to a physical
attack by handheld tools
b. shall be equipped with a key, combination padlock or similar locking
device that is resistant to an attack using handheld tools
c. if transported in an open conveyance (e.g., open back of a half-ton truck,
flatbed truck), it shall be securely affixed to the vehicle to prevent
unauthorized removal of the container
d. if containing a sealed source with an activity level less than category 3
(see Table A), may be stored in the securely locked trunk or other cargo
area of a vehicle while in storage and during transportation .
Required Operating Procedures Manual
of Licensee for use and with CEDO
60
Response Measures
Emergency Response Assistance Plan (ERAP)
What does it do?
• The plan is intended to assist local emergency responders by
providing them with access to technical experts and specially
trained and equipped emergency response personnel at the
scene of an incident.
• Describes the specialized response capabilities, equipment and
procedures that will be used to support a response to incidents
involving high-risk dangerous goods.
ERAP and Radioactive Materials
• If a shipment of radioactive material requires an ERAP, it will be
provided by the consignor.
Example: CNL has an ERAP in place and approved by Transport
Canada which covers the transport of HEU in solid and liquid form
61
Response Measures
Emergency Response Assistance Plan (ERAP)
Where do I find ERAP information?
• Transportation of Dangerous Goods Regulations requires that
the ERAP reference number and activation telephone number
be present on the shipping documents.
Examples: 2-2021 ERP: 613-123-4567
ERAP 2-2021: 316-123-4567
PIU 2-2021: 613-123-4567
62
Response Measures
Emergency Response Assistance Plan (ERAP)
**First responders are reminded to only undertake actions consistent with their
training and level of equipment.
How is it activated?
When arriving at the scene of a transportation incident involving radioactive
materials, the following steps are advised:
1. Consult the Emergency Response Guide and follow applicable guidelines
2. Locate the ERAP Number on shipping document
3. Call the ERAP activation telephone number
4. If the ERAP cannot be located, call CANUTEC
5. Call the Spills Action Centre to advise of incident
63
Response Measures
Emergency Response
• Guidebook
Intended for use by first responders
a transportation incident involving
during
dangerous goods.
64