Professional Documents
Culture Documents
1 Review
1 Review
FIRST REVIEW
29.08.2022
1
ABSTRACT
The design of the G+6 multi-storied building starts with the planning of the
residential building both for individual house and total layout of the building.
The building has an overall area of 530 sq.m with four houses in each floor.
Each house an area of 121 sq.m. Total building is designed in AutoCAD and
analyzed by STAAD Pro. After being analyzed by STAAD Pro the results are
verified by manual design using code books IS 456-2000 and SP-16. STAAD
Pro is the new advancement in structural engineering. This software is used
for analysis and design of concrete, steel, timber and aluminium. The model is
been created and analyzed under various load condition such as dead load,
live load, and some combination. As a result of analysis, shear force, bending
moment and support reaction are evaluated. Based on analyzed result, the
structure is designed manually and cross referenced with the software results.
2
INTRODUCTION
3
LITERATURE REVIEW
4
S.NO TITLE OF THE AUTHOR DETAILS
PAPER
1
Design and analysis of multi- Falak Vats • Stadd.Pro gives hardly any variation in results compared to the
storey building by the use of results computed manually.
Stadd.Pro • Stadd.Pro allows you to follow the criteria of several design
codes for eg. The Indian standards relating to loads, designs,
analysis etc.
• Stadd.Pro is a much easier and faster way of analysing and
designing a structure when compared to manual computation.
4
A REVIEW ON DESIGN Monika Verma • Staad.pro provides much easier work than manual
AND ANALYSIS OF MULTI- calculation.
STOREY BUILDING •Staad.pro gives results which are almost accurate and
economical when compared to manual calculation.
•The differences in wind load, seismic load, bending
moment and shear with the height is showing direct
relationship.
•Staad.pro is a user-friendly program which provides less
time-consuming work.
•Also, we conclude that the more advanced technologies
we got is the more knowledge we gain for a batter work.
6
S.NO TITLE OF THE PAPER AUTHOR DETAILS
5
Study of Analysis and Design S. G. MAKARANDE • The principle objective of this project is to analyze and
of Multistoried Residential design a multi-storied building [G + 7] using STAAD.
Building Pro.
•For analyzing a multi storied building one has to
consider all the possible loadings and see that the
structure is safe against all possible loading conditions.
6 ANALYSIS AND DESIGN OF L. SANTHOSH KUMAR • Designing using Software’s like Staad reduces lot of
A (G + 6) MULTI STOREY time in design work.
RESIDENTIAL • Details of each and every member can be obtained using
BUILDING USING STAAD staad pro.
PRO •All the List of failed beams can be obtained and also
Better Section is given
7
S.NO TITLE OF THE PAPER AUTHOR DETAILS
7 To Study Analysis and Design Kushal Yadav •Comparison between manual calculation and STADD
of Multi-Storey building using Pro. Software analysis and design, conclude that the
STAAD-pro. And Comparing analysis is same but design is some different.
with Manual Calculations •Building plan was develop and draft in Auto- CAD
with required dimension.
•The design of slab, beam, column, rectangular footing
and staircase is done with IS 456-2000 as limit state
method.
8
A REVIEW ON DESIGN Abdikadir Hassan • Staad.pro provides much easier work than manual
AND ANALYSIS OF MULTI- calculation.
STOREY BUILDING BY • Staad.pro gives results which are almost accurate and
STAAD.PRO economical when compared to manual calculation.
•The differences in wind load, seismic load, bending
moment and shear with the height is showing direct
relationship.
•Staad.pro is a user-friendly program which provides less
time-consuming work.
8
S.NO TITLE OF THE AUTHOR DETAILS
PAPER
9 Design and Fabrication of an A. ALBAGUL The multi-level car parking system had successfully been designed and
Automated Multi-level Car developed. The PLC with the help of some sensors checks the
Parking System availability of the vacant place on each floor. It can be noticed that the
control system for the multi-level car parking system has achieved the
anticipated
performance to regulate the entry and exit of the car to/from several
floors accurately. The number of entering and existing car from all the
three floors was controlled as per the signals from the sensors on each
floor at the entry and exit point. The entry and exist phases of the cars
depends on the availability of the elevator and the time required for
exist.
10 AUTOMATIC Sonar R. M. In the present era there is scarcity of parking space. In smart city
UNDERGROUND CAR progression each city in India need a well turned out use of space. To
PARKING SYSTEM make use of under ground space, it is beneficial to the city and the
decedent. We have suggested one of the solutions for the smart city.
Design of suggested model is easy, permanent and effective. Even
though initial cost is high in long run, the cost of the project can be
recovered. The design process and fabrication of the model is detailed
in this paper. For automation controller has been used. Sensor sense the
vacant space and it is easy to park the vehicle.
9
METHODOLOGY
TOPIC SELECTION
LITERATURE REVIEW
PLAN
DESIGN
11
GROUND FLOOR
12
GENERAL DETAILS OF THE PROJECT
14
THANK
YOU
15