Professional Documents
Culture Documents
N21 Test Case MoP Manual Check Guideline v1.0
N21 Test Case MoP Manual Check Guideline v1.0
1 © 2023 Nokia
Quick Report
Process Flow (1 of 2)
The Quick Report function already deploy for TEMS Pocket. This will help DT engineer to do verification on site whether the log that they
collected is PASS or NOT PASS. Please use the naming convention base on Workshop document provided in the workshop. As the quick report
need the naming of the log should be correct.
A site can have more than one sector, and one sector
consist of two location. Every time you finished all the
location within the sector, and finished all sector within
the site you MUST UPLOAD ALL PASSED LOG
USING QUICK REPORT
2 © 2023 Nokia
Quick Report
Process Flow (2 of 2)
When you taking a log in a certain sector and location you can do it using 2 options below.
Option 1: Option 2:
You can do one test case at a time and You do all the test case first, then
then upload the result. Do the test upload it using upload script and see
case until it PASS and the continue to the quick report result. You redo test
next text case. case that not passed. Then upload it
again the PASS log and re-test log
Continue the process for all the test
after ALL IS PASS.
case one by one.
In the end after all the test case has
been done select all the pass log then
upload it using the upload script and
see the quick report result. You need
to make sure all is PASS.
3 © 2023 Nokia
NR21 Test Case MoP & Manual Check Guidance
Test case on how to do and collect the log is available in the next slide.
Next slide also will contain how to do manual check in TEMS Pocket.
ATTENTION!!! If you already do all test and do verification to see the logs PASS or NOT PASS. You need to
compile all the PASS logs the upload it using upload script provided in the TEMS Pocket and see the quick report
result. ALL TEST MUST PASS.
Please follow also MoP provided by InfoVista team in below documents. This document also provide the naming
method used for conduct a test.
Nokia Singapore
Indoor Testing Workshop
4 © 2023 Nokia
Attach Test (1 of 6)
Accessibility, Retainability, Call Setup Time
The attach test procedure will generate result for Attach Success Rate, Call Setup Success Rate, Drop Call, and Call Setup Latency. Due to
control function in TEMS Pocket is having problem the attach/detach process is done by airplane mode.
Problem in Samsung UE: If using airplane mode on/off with the below method Samsung UE will generate 5 additional RRC:RRCSetupRequest,
RRC:RRCSetup, RRC:RRCSetupComplete, and 5GMM:RegistrationRequest (total 10 messages each for 5x iteration).
Oppo UE: Oppo UE does not have problem like Samsung UE, recommend to use Oppo UE to do Attach test.
The Airplane Mode ON should be done before inactivity timer to trigger 5GMM:DeRegistrationRequest.
1 sample per sector per MNO, 1 sample 1 logfile (for NR21).
5 © 2023 Nokia
Attach Test (2 of 6)
Clear Events and Layer 3 messages
6 © 2023 Nokia
Attach Test (3 of 6)
Checking the Log - Accessibility
Go to Layer 3 Tap and hold the Go to Events
Messages in Message “RRC Setup Request Message and wait
menu then find “RRC (UL-CCCH)”. After until “Script End
Setup Request (UL- popup menu showed Event” showed.
CCCH)” Message. tap “Show only this
There will 5
message type”. Tap
RRC:RRCSetupRequ
on the [magnifier
est messages for
glass/search icon]
Oppo phone. But for
twice to see the
Samsung phone there
result. Seems a bug in
will be 10 messages.
software after tap
“Show only this
message type” the
search result not
shown directly.
7 © 2023 Nokia
Attach Test (4 of 6)
Checking the Log - Accessibility
Do the same with:
• “RRC Setup (DL-CCCH)” Message.
• “RRC Setup Complete (UL-DCCH)
• “Registration Request”
• “Registration Accept”
There will 5 messages for Oppo phone for
each of the message. But for Samsung
phone there will be 10 messages, except
“Registration Accept”, Samsung and Oppo
showing the same 5 messages.
8 © 2023 Nokia
Attach Test (5 of 6)
Checking the Log - Retainability
9 © 2023 Nokia
Attach Test (6 of 6)
Call Setup Time
Call setup time to be calculate from RRC setup to RRC setup complete
Find the “RRC Setup Calculate time interval between “RRC
(DL-CCCH)” Setup (DL-CCCH)” and “RRC Setup
message in Layer 3 Complete (UL-CCCH)” message as Call
Messages menu. Setup time. Tap [Down] button to search
for the next “RRC Setup (DL-CCCH”
messages (until all 5 messages). Average
the result.
10 © 2023 Nokia
Latency (1 of 2)
• Ping IP 8.8.8.8
• Packet size 32byte
• Ping repetition 10 times
• KPI is based on the 10 samples average
11 © 2023 Nokia
Latency (2 of 2)
12 © 2023 Nokia
Download and Upload Test
13 © 2023 Nokia
Intra-Frequency Handovers (1 of 2)
• This test is to test the Intra-Frequency handover from
NR21 to NR21 with service continuous (PSDL).
• 1 sample per sector per MNO, 1 sample 1 logfile (for
NR21).
14 © 2023 Nokia
Inter-Frequency Handovers (2 of 2)
6. Move to area with signal weaker than -85dBm, observe in the
Events messages panel for message “NR Intra-frequency
Handovers”. You can do this by type “NR Intra-frequency
Handover” in the filter input then press [DOWN] repeatedly if
the messages goes to fast.
7. Wait 1-2 second after the HO then stop the test
8. Tap the message to see the one NR-ARFCN value for N21 and
one source PCI and target PCI. If correct, then stop the test.
9. See also the Handover Completion Time to see the Handover
Time values.
15 © 2023 Nokia
Inter-Frequency Handovers (1 of 2)
• This test is to test the IFHO handover from NR21 to
NR35 with service continuous (PSDL).
• Event A2 threshold set example RSRP = -85dBm,
without CA service
• 1 sample per sector per MNO, 1 sample 1 logfile (for
NR21).
16 © 2023 Nokia
Inter-Frequency Handovers (2 of 2)
6. Move to area with signal weaker than -85dBm, observe in the
Events messages panel for message “NR Inter-frequency
Handovers”. You can do this by type “NR Inter-frequency
Handover” in the filter input then press [DOWN] repeatedly if
the messages goes to fast.
7. Wait 1-2 second after the HO then stop the test
8. Tap the message to see the source (n1) and target (n78)
information. If correct, then stop the test.
17 © 2023 Nokia
Inter-RAT Handovers (1 of 2)
• This test is to test the IRAT handover from 5G to 4G
with service continuous (PSDL).
• Event B2 threshold set example RSRP = -85dBm.
• 1 sample per sector per MNO, 1 sample 1 logfile (for
NR21).
18 © 2023 Nokia
Inter-RAT Handovers (2 of 2)
6. Move to area with signal weaker than -85dBm, observe in the
Events messages panel for message “Handover to LTE”. You can
do this by type “Handover to LTE” in the filter input then press
[DOWN] repeatedly if the messages goes to fast.
7. Wait 1-2 second after the HO then stop the test
8. Tap the message to see the source (n1) and target (LTE)
information. If correct, then stop the test.
19 © 2023 Nokia
Script Samples
20 © 2023 Nokia
XML Script Sample for TEMS Pocket
Ping_10x_32Bytes_8.8.8.8.xml Ping_10x_32Bytes_8.8.8.8_Oppo.xml
21 © 2023 Nokia