Professional Documents
Culture Documents
Ash Handling System
Ash Handling System
Ash Handling System
5
6
The hydraulic ash handling system carries the ash with the
flow of water with high velocity through a chanel and
finally dumped to the sump.
This type of system is subdivided as low velocity system
and high velocity system.
Ash from the furnace grate falls into the system of water
possessing low velocity and carried to sump with water. The
velocity of water in the water trough is usually between 3-5
m/sec.
The ash carrying capacity of this system is 50 tons/hr and
distance covered is 500 meters.
7
8
the hoppers below the boilers are fitted with water
nozzles at top and on the sides
The top nozzles quench the ash and the side nozzle
provide the driving force to carry the ash through a
trough.
The ash carrying capacity of this system is as large as
120 tons/hr and the distance covered is as large as
1000 meters.
9
HIGH VELOCITY ASH HANDLING SYSTEM 10
1. It is clean,dustlessand totally enclosed.
2. Its ash carrying capacity is considerably large therefore it is
more suitable for large thermal power plant .
3. It can discharge the ash at a considerable distance from the
power plant.
4. The unhealthy aspects of ordinary ash basement work is
eliminated.
5. The whole systemic clean and healthy.
6. The important feature of this system is the absence of
working parts with the ash.
11
Pneumatic or vacuum extraction ash handling system
12
This system has been developed for handling abrasive
ash as well as dusty materials such as fly-ash and soot.
This is more suitable to the boiler plants from which ash
and soot must be transported some considerable
distance for final disposal.
The pneumatic ash handling system is subdivided as
mechanical I.D. fan or stream jet type system or water
jet ash handling system.
The mechanical exhauster is proffered where large
tonnages of material are to be conveyed. the power
require for mechanical exhauster is 3 Kw per ton of ash.
13
Vacuum & pressure pneumatic ash conveying system
17