Professional Documents
Culture Documents
Protection of Transformer by Efficient Cooling AND Voltage Control Through Bess
Protection of Transformer by Efficient Cooling AND Voltage Control Through Bess
BY: ARNAV K B
CONTENTS
Introduction Transformers & its energy losses Temperature rise in transformers Methods of cooling Description of BESS Block diagram representation Applications
INTRODUCTION
This project is about transformers protection and cooling. As the heating of transformers have many unwanted effects regarding their functionality and efficiency.
Continuous increasing temperature harms winding, insulation as well as decreases the efficiency of transformer. To keep the temperature maintained, different kind of cooling protections are used. Here in this project, a way of forced cooling by transformers oil is taken as objective. This not only helps in cooling also increases the insulation capacity of transformer.
. Here a VSC (voltage source controller) is used for the protection of transformers secondary winding.
As an induction motor needs a high starting torque & due to which it needs a high current from source, thus if it is connected or coupled with a transformer it harms its secondary winding as the over current or load fluctuation. As while operating a induction motor on continuous switching, problem regarding surge current occurs. As this is harmful to secondary of the transformer, to stabilize the system we use a BESS (battery energy storage system) and a capacitor bank based VSC. Which overcome the repetition of the surge of current which occurs during operation of the induction motor.
TRANSFORMER
A transformer is a device that transfers electrical energy from one circuit to another through inductively conductors - the transformer's coils. A varying current in the primary winding creates a varying magnetic flux in the transformer's core and thus a varying field through the secondary winding. This varying magnetic field induces a varying electromotive force (EMF), or voltage, in the secondary winding. This effect is called inductive coupling
An ideal transformer would have no energy losses, and would be 100% efficient. In practical transformers energy is dissipated in the windings, core, and surrounding structures. Losses in transformers (excluding associated circuitry) vary with load current, and may be expressed as No-load" or Full-load" loss.
Whereas Hysteresis and Eddy current losses contribute to over 99% of the no-load loss. Transformer losses are divided into losses in the windings, termed copper loss, and those in the magnetic circuit, termed iron loss.
When transformers are operated at their capacity limit, the key variable to monitor is the internal or oil temperature due to heat. This task is complicated by the problem that the temperature may not be uniform throughout the inside of the transformer & damage can be done by just a local hot spot. Under extreme heat, the oil can break down , sustain an electric arc, or even burn, and a transformer may explode.
Cooling For Oil Immersed Transformers This type of cooling is used for oil filled transformers . Oil Natural Air Forced Type (O.N.A.F.) Oil Forced Air Natural Type (O.F.A.N.) Oil Forced Air Forced Type (O.F.A.F.)
In the fig. above Hot oil from core and coils rises to the top of the tank above the inlet to the radiator. Cool oil from the radiator sinks to the bottom of the radiator through the outlet and into the bottom of the core and coils. This process is called Thermo-siphoning
Energy storage is playing an increasingly important role in the electrical power system thanks to the development and advance in various energy storage and power electronics technologies in recent years.
On the other hand, the increase in electrical load, the tendency to operate the power system closer to its limit and associated reliability issues are driving the development of energy storage technologies and their applications
Needed to maintain and regulate the proper cooling for the core and coil assembly of the transformer. Heat is directly related to moisture Paper insulation is destroyed by heat and moisture The life expectancy of a transformer is largely based on moisture and heat management.
This type of transformer cooling as well as protection system can be used in small scale industries , at captive power plants. Etc..
THANK YOU