Professional Documents
Culture Documents
3.2 Membuat Cetakan Gips Untuk Cetak Tekan Satu Sisi
3.2 Membuat Cetakan Gips Untuk Cetak Tekan Satu Sisi
STUDENTS UNDERSTAND THE PROCESS OF MAKING THE MOLD FOR ONE-SIDE IMPRESS TECHNIQUE STUDENTS ARE ABLE TO MAKE GYPSUM MOLD FOR ONE-SIDE IMPRESS TECHNIQUE
COMPETENCY MAPPING
COMPETENCY STANDARD
BASIC COMPETENCY
BASIC COMPETENCY
BASIC COMPETENCY
impress technique
LEARNING MATERIALS
One side mold is a mold that has only one surface.
Model
Product Mould
LEARNING MATERIALS
Picture of concave mold and its product Picture of convex mold and its product. Picture of unhooked concave mold. Picture of hooked mold.
Tools
brush
Wooden casting box Bowl
Panel base
Seni Kerajinan dan Pariwisata
Ribbon Tool
Materials
Separator
made from the mixture of water, vegetable oil and detergent, then heat it.
Gypsum/plaster
Water
WORKING STEPS
1. Put the model on the panel base, then nub with separator so that it will be easily released.
2. Install the panel base on the four side of the model with 4 cm distance from the model. Then put the flexible clay on the connected part to avoid the flowing gypsum slip.
Seni Kerajinan dan Pariwisata
WORKING STEPS
3. Make gypsum slip to make mold.
4. Pour the slip on the model carefully so that all the model surface covered thoroughly and let it harden.
6. Release the model from the mold then clean and dry it.
COMPETENCY LINK
Hall. Morgen. 1997. The Potters Primer. A step by Step. Apple Press. London Mattison, Steve .1998, . Ceramics, Step BY Step Instructions for 18 delightful projects, Apple Press. London.
Tim Studio Keramik. 2007. Modul Pendidikan Dan Pelatihan, P4TK Seni Dan Budaya Yogyakarta.
Wahyu Gatot Budiyanto, 2008. Kriya Keramik Untuk Sekolah Menengah Kejuruan , BSE , Jilid. 1,2,3 .Direktorat Pembinaan Sekolah Menengah Kejuruan, Jakarta .